Undocking The Stx-1700Cw - Crestron STX-1700CW Operation Manual

Wall mount 2-way compact color touchpanel

Hide thumbs Also See for STX-1700CW:

Table of Contents

Crestron STX-1700CW

Operations Guide - DOC. 6228A

Wall Mount 2-Way RF Compact Color Touchpanel

Insert STX-1700CW

2. Refer to the diagram below. Make sure that the STX-1700CW is

squarely seated in DA-1700CW, and press upper edge of touchpanel

inward to dock the touchpanel. The touchpanel will snap into position.

Dock STX-1700CW

Undocking the STX-1700CW

During normal operation, the DA-1700CW unlatches the STX-1700CW electrically

via the control system program. When the touchpanel is unlatched, it snaps outward

slightly, and then may be removed by hand. The control system program defines the

method (i.e., touchpanel button) of unlatching.

Electrical Undocking of Touchpanel

1. Via the touchpanel and/or control system program, unlatch the

touchpanel.

2. Pull the upper edge of the touchpanel outward and remove the

touchpanel.

Wall Mount 2-Way RF Compact Color Touchpanel: STX-1700CW • 7

Table of Contents