Crestron QM-FTMC Operation And Installation Manual page 52

FlipTop Media Center
48 • FlipTop Media Center: QM-FTMC
1. Open Crestron Toolbox and click Tools | Manage Address Book to
display the communications settings. The DefaultAddressBook.adr file
contains several default address settings. Select Serial on COM 1 for
serial communication.
Crestron Toolbox – "Address Book" Window
The PC communication settings specified in the address book should
match the protocol that the processor expects. The standard settings are
as follows:
•
Port = COM 1 through COM 8. Select the correct COM port
on the PC.
•
Baud rate = Auto-Detect.
•
Parity = None.
•
Number of data bits = 8.
•
Number of stop bits = 1.
•
Hardware handshaking (RTS/CTS) enabled.
•
Software handshaking (XON/XOFF) not enabled.
2. After setting the correct parameters, click OK to return to the Crestron
Toolbox main window.
3. Select Tools | System Info. If the connection is successful, the System
Info window displays the processor and device information.
Operations & Installation Guide - DOC. 6311A
Crestron QM-FTMC