Crestron QM-FTMC Operation And Installation Manual page 32

FlipTop Media Center
Default Programming Example – Program and Speech, Dual Volume Control
28 • FlipTop Media Center: QM-FTMC
Default Programming Notice
Choosing Yes allows you to select one of the three default programming
selections. Click the appropriate selection:
Program and Speech – Dual Volume Control
•
Program and Speech – Single Volume Control
•
Program Only Volume Control
•
Click OK when finished.
8. Setup the QM network cable routing. Right-click on the connector and
select the routing to the desired device. The connectors that are
displayed in the following diagram have an exclamation mark (!) if
they are selectable for routing.
Operations & Installation Guide - DOC. 6311A
Crestron QM-FTMC