Crestron QM-FTMC Operation And Installation Manual page 34

FlipTop Media Center
30 • FlipTop Media Center: QM-FTMC
Setting Net IDs in SystemBuilder
SystemBuilder provides a convenient method of selecting and assigning Net IDs
to devices.
1. Ensure that all network devices are connected to the control system.
2. After completing your SystemBuilder program, click the Build and
Upload button
SystemBuilder – "Finish" Window
3. On the "Finish" window, click the Set Network IDs... button to assign
the network IDs. SystemBuilder provides three methods for assigning
Net IDs.
Drag and drop a device from the program tree on the left onto the
•
device in the network tree on the right.
Right-click a device the program tree on the left and select Setup
•
from the sub-menu.
Right-click on a device in the network tree on the right and set the
•
Net ID directly.
Crestron QM-FTMC
.
Operations & Installation Guide - DOC. 6311A