Crestron QM-FTMC Operation And Installation Manual page 21

Fliptop media center

Hide thumbs Also See for QM-FTMC:

Table of Contents

Crestron QM-FTMC

Operations & Installation Guide – DOC. 6311A

1. Ensure that all network devices are connected to the control system.

2. Open Crestron Toolbox and establish communications (refer to page

46).

3. Select the Network Device Tree

Device Tree.

Network Device Tree

4. Right-click on the device Net ID, and when the sub-menu appears,

select Change Network ID from the sub-menu.

Network Device Tree – Sub-Menu

5. Enter a new Net ID and press Enter.

Enter New Net ID

Repeat this procedure for each additional network device requiring a Net ID

change.

FlipTop Media Center

icon, or select Tools | Network

FlipTop Media Center: QM-FTMC • 17

Table of Contents