Example Program - Crestron QM-FTMC Operation And Installation Manual

FlipTop Media Center
42 • FlipTop Media Center: QM-FTMC
QM-FTMC Buttons - Signal Descriptions
SIGNAL TYPE AND
NAME
Digital Inputs:
<fb1> through <fb20>
Digital output:
<FlipTopOpen>
Analog input:
<Bargraph1>
Analog input:
<Bargraph2>

Example Program

An example program for the QM-FTMC is available from the "Example
Program" section of the Crestron website
(www.crestron.com/exampleprograms
Crestron QM-FTMC
DESCRIPTION
Activates the corresponding LED for as long as the
input is high.
If two buttons are combined, then only the LED for the
top button in the vertical pair will be visible.
High/1 (level sensitive) = Activate LED feedback;
Low/0 = Turn off LED
Indicates that the FlipTop cover is fully open. The
feedback remains high for as long as the cover is open.
If the cover is not fully open the signal will go low, the
keypad buttons will be disabled and the unit will not
report any button presses.
High/1 = FlipTop open; Low/0 = FlipTop not fully open
Sets the levels that will be displayed on the left
bargraph. The bargraph is an 8-segment LED and is
proportional to the input.
Valid values range from 0% to 100%.
Sets the levels that will be displayed on the right
bargraph. The bargraph is an 8-segment LED and is
proportional to the input.
Valid values range from 0% to 100%.
. Search for QM-FTMC.ZIP.
)
Operations & Installation Guide - DOC. 6311A