Crestron QM-FTMC Operation And Installation Manual page 40

FlipTop Media Center
36 • FlipTop Media Center: QM-FTMC
QM-FTMC Basic Controls - Signal Descriptions (continued)
SIGNAL TYPE
AND NAME
Analog input:
<VidInputSelect>
Analog output:
<VidInputSelect_F>
Analog input:
<AudInputSelect>
Analog output :
<AudInputSelect-F>
Analog input:
<CompForRGB-Aud>
Analog output:
<CompForRGB_Aud-F>
Analog input
<CompForComposite_Aud>
Analog output:
<CompForComposite_Aud-F>
Analog input:
<CompForSVideo-Aud>
Analog output:
<CompForSVideo_Aud-F>
NOTE: Use an Analog Initialize to send a decimal input signal to the symbol.
NOTE: Returned values match values that were selected for the <VidInput
Select> and <AudInput Select> inputs.
Crestron QM-FTMC
DESCRIPTION
Selects the video source that will be switched to
the QM output.
Valid analog values range from 0d to 3d as
follows:
0d = No source
1d = COMPUTER (RGB or component on three
channels)
2d = VIDEO (on one channel) and S-VIDEO (on
two channels)
3d = VIDEO (on one channel) and S-VIDEO (on
two channels)
A value of 2d or 3d switches both the VIDEO and
S-VIDEO sources to the QM output.
The final video source selection is completed at
the QM receiver. Here a value of 2d selects
VIDEO; a value of 3d selects S-VIDEO.
Out of range values are ignored.
Indicates the video source(s) present at the QM
output.
Selects the program audio source to be switched
to the QM output.
Valid analog values range from 0d to 3d as
follows:
0d = No source (mute audio)
1d = COMPUTER AUDIO
2d = VIDEO L and R
3d = S-VIDEO L and R
Out of range values are ignored.
Indicates the audio source present on the stereo
program channel of the QM output.
Sets the source gain compensation for the
COMPUTER AUDIO source.
Valid analog values range from -100d (-10dB) to
+100d (+10dB), adjustable in increments of 0.1dB
(1d = 0.1dB).
Indicates the source gain compensation being
applied to the COMPUTER AUDIO source.
Sets the source gain compensation for the VIDEO
audio source.
Valid analog values range from -100d (-10dB) to
+100d (+10dB), adjustable in increments of 0.1dB
(1d = 0.1dB).
Indicates the source gain compensation being
applied to the VIDEO audio source.
Sets the source gain compensation for the S-
VIDEO audio source.
Valid analog values range from -100d (-10dB) to
+100d (+10dB), adjustable in increments of 0.1dB
(1d = 0.1dB).
Indicates the source gain compensation being
applied to the S-VIDEO audio source.
Operations & Installation Guide - DOC. 6311A