Crestron QM-FTMC Operation And Installation Manual page 45

Crestron QM-FTMC
Operations & Installation Guide – DOC. 6311A
combined. No other combinations are valid. That is, two buttons cannot be
combined horizontally; the buttons on rows 2 and 3 cannot be combined.
QM-FTMC Symbol – Detail View of Buttons
QM-FTMC Buttons - Signal Descriptions
SIGNAL TYPE AND
NAME
Digital Outputs:
Button presses/vertical pair
<Press1>, <Press6>
Button presses/vertical pair
<Press2>, <Press7>
Button presses/vertical pair
<Press3>, <Press8>
Button presses/vertical pair
<Press4>, <Press9>
Button presses/vertical pair
<Press5>, <Press10>
Button presses/vertical pair
<Press11>, <Press16>
Button presses/vertical pair
<Press12>, <Press17>
Button presses/vertical pair
<Press13>, <Press18>
Button presses/vertical pair
<Press14>, <Press19>
Button presses/vertical pair
<Press15>, <Press20>
Continued on the following page
FlipTop Media Center
DESCRIPTION
Indicates that the corresponding button has been
pressed. The signal remains high for the duration of the
button press.
If the FlipTop cover is not fully open the buttons are
disabled and the unit will not report any button presses,
and will release any button that is already pressed. The
status of the cover is given by the <FlipTopOpen>
output.
If two buttons are combined to form one larger button,
the same signal should be attached to both button
presses.
High/1 = Button pressed; Low/0 = Button released
FlipTop Media Center: QM-FTMC • 41