Table of Contents
Advertisement
FlipTop Media Center
34 • FlipTop Media Center: QM-FTMC
"Device Settings" Window
NOTE: This procedure sets the Net ID for the QM-FTMC in the program only.
It does not automatically set the Net ID for the QM-FTMC itself. SIMPL
Windows automatically changes Net ID values of a device added to a program if
a duplicate device or a device with the same Net ID already exists in the
program. Always ensure that the hardware and software settings of the Net ID
match. For Net ID hardware setting details, refer to "Identity Code" on page 16.
Symbols in Programming Manager
Three symbols make up the QM-FTMC: Basic Controls, Microphone Controls,
and Buttons. These symbols may be opened in Detail View. Following each
symbol, a table lists the symbol input and output signals, respectively, and their
functional descriptions.
Basic Controls
The Basic Controls module is built into slot 01 of the QM-FTMC.
The QM-FTMC provides the following video inputs:
One RCA input labeled VIDEO, which accepts one composite video
•
source.
One RGB video input labeled COMPUTER, which accepts one
•
computer or component video source.
One mini-DIN input labeled S-VIDEO, which accepts one S-video
•
source.
The QM-FTMC provides the following stereo line level program audio inputs:
Two RCA inputs labeled VIDEO L and R.
•
Two RCA inputs labeled S-VIDEO L and R.
•
One mini phone jack input labeled COMPUTER AUDIO.
•
In addition to the stereo program audio, the QM-FTMC provides two
microphone/line-level inputs.
The QM-FTMC provides one QM output that transmits three channels of video
together with the stereo program audio and one or both microphones via
CresCAT-QM. The built-in switcher can switch any video source independent
of the program audio source.
Crestron QM-FTMC
Operations & Installation Guide - DOC. 6311A
Advertisement
Table of Contents
