Crestron QM-FTMC Operation And Installation Manual page 17

Crestron QM-FTMC
RJ-45 MALE CONNECTOR
125V – 50/60Hz 10A
Operations & Installation Guide – DOC. 6311A
RJ-45 QuickMedia Connector Pin Assignments
RJ-45 PIN WIRE COLORS
NUMBER
(EIA 568B)
1 WHITE/ORANGE
2 ORANGE
3 WHITE/GREEN
4 BLUE
5 WHITE/BLUE
6 GREEN
7 WHITE/BROWN
8 BROWN
AC Power
Connect the six-foot (183 cm) grounded AC line cord to supply AC power to
the outlet on the topside of the QM-FTMC.
The international version (QMI-FTMC) is equipped with a standard IEC-320
electrical appliance coupler. The IEC (International Electrotechnical
Commission) is the international standards and conformity assessment body
for all fields of electrotechnology.
Indicators
PWR (Power)
This LED illuminates when 24 volts DC is supplied to the QM-FTMC from
Cresnet.
NET
This LED illuminates when communication between the control system and the
QM-FTMC is established (the unit is polled on the network). Illumination
indicates that the SIMPL Windows program currently loaded has a network
device defined at the same Net ID as the QM-FTMC.
Bargraphs
Two sets of eight-segment programmable red LEDs are provided that can be
programmed to display audio level settings. The LEDs display is proportional to
the input and can be set from zero to 100%. Refer to "Buttons" on page 40 for
programming details.
NOTE: Indicators are not included with NB models.
FlipTop Media Center
QM ASSIGNMENT
RGB, COMPOSITE, COMPONENT
S-VIDEO, AND AUDIO
- RGB RED (- CHROMINANCE) (-P
+ RGB RED (+ CHROMINANCE) (+P
- RGB GREEN (- LUMINANCE) (-Y)
+ AUDIO
- AUDIO
+ RGB GREEN (+ LUMINANCE) (+Y)
- RGB BLUE (- COMPOSITE) (-P
+ RGB BLUE (+ COMPOSITE) (+P
FlipTop Media Center: QM-FTMC • 13
)
R
)
R
)
B
)
B