Crestron QM-FTCC Operations & Installation Manual page 21

Fliptop computer center
Hide thumbs Also See for QM-FTCC:
Table of Contents

Advertisement

Crestron QM-FTCC
Operations & Installation Guide – DOC. 6313A
3. Carefully press the two small replacement buttons in place, making
sure LED window faces up. Use care not to dislodge the membrane and
circuit board.
NOTE: The removable buttons fit snugly on the rubber membrane. Remove
carefully to avoid pulling the membrane from the unit.
4. The divider bar slips into the slots on the back of the faceplate.
5. Replace the faceplate.
Button Installation
QM-FTCMK Cable Management Plate
The QM-FTCC is shipped with a blank bottom plate. A cable management plate
is available to provide a pullout cable solution for the computer input and LAN
passthrough cables. The kit contains a six-hole plate, grommets, and two 6-foot
cables (computer and computer audio).
Order the QM-FTCMK Cable Management Kit for domestic models.
Order the QMI-FTCMK Cable Management Kit for international
models.
Parts Supplied with Optional Cable Management Kit
PART DESCRIPTION
Small Cable Bushing, 5/16 inch ID, 0.5 inch OD
Large cable Bushing, 0.55 inch ID, 0.80 inch OD
Cable Support Plate
Tie Wrap
Computer RGB Cable, VGA to VGA, 6 ft long
Computer Audio Cable, 3.5 mm Stereo, 6 ft long
FlipTop Computer Center
FlipTop Computer Center: QM-FTCC • 17
QUANTITY
4
2
1
3
1
1

Advertisement

Table of Contents
loading

Table of Contents