Crestron QM-FTCC Operations & Installation Manual page 24

FlipTop Computer Center
20 • FlipTop Computer Center: QM-FTCC
Mounting Parts Supplied with the QM-FTCC
PART DESCRIPTION
Screw #6-32, Pan Head, Phillips
Screw #10, Pan Head, Phillips
Mounting Bracket
1. Install the eight supplied #6-32 screws, but do not tighten (four on the
front side and four on the rear side). These will be used to secure the
front and rear mounting brackets.
2. Position the QM-FTCC in the mounting hole.
Mounting Bracket Screw Locations
3. Install the four #10 screws in the mounting brackets (two screws per
bracket). Refer to the following diagram.
4. Slide the mounting brackets over the #6-32 screws and tighten the
#6-32 screws.
5. Turn the four #10 screws equally until they contact the underside of the
mounting surface.
NOTE: Do not over-tighten the #10 screws as this may damage the surface
and/or the unit.
Crestron QM-FTCC
QUANTITY
8
4
2
Operations & Installation Guide - DOC. 6313A