7 in. and 10.1 in. room scheduling touch screens (10 pages)
Summary of Contents for Crestron TS-770
Page 1
* Refer to the TS-770-B-S and TS-1070-B-S product pages at www.crestron.com for a The Crestron® TS-770 and TS-1070 are surface mount touch screens that complete list of color variations. feature web browsing, Smart Graphics® software and HTML5 UI technology, custom-programmable icons, H.265/H.264 streaming video, a Rava®...
Page 2
The USB ports are used to connect compatible Crestron LED accessories to the touch screen. NOTE: The TS-770 may use either PoE or PoE+ to supply power to compatible LED accessories over USB; the TS-1070 must use only PoE+ to supply power to LED accessories over USB.
Quick Start TS-770/TS-1070 7 in. and 10.1 in. Surface Mount Touch Screens Install the Cable Grommet Configure the Touch Screen When power is applied for the first time, the following screen is displayed. The touch screen may take up to two minutes to boot.
Page 4
1. Ensure that the touch screen is connected to the network. 2. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its IP address on the network. 3. Enter the touch screen IP address into a web browser.
For new accounts, register for a Crestron XiO Cloud account at www.crestron.com/xio-cloud-registration. www.crestron.com/model/6510820 3. Claim the device to the service as described in the Crestron XiO Cloud User Guide (Doc. 8214) at www.crestron.com/manuals. TS-1070 4. Select the device from the cloud interface to view its settings.
Page 6
Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
Need help?
Do you have a question about the TS-770 and is the answer not in the manual?
Questions and answers