Crestron QM-FTCC Operations & Installation Manual page 15

Crestron QM-FTCC
1
8
RJ-45 MALE CONNECTOR
8 1
125V – 50/60Hz 10A
Operations & Installation Guide – DOC. 6313A
QM
This eight-pin RJ-45 transport port, located on the bottom side of the
QM-FTCC, allows connection of the QuickMedia cable. It carries audio, video,
and microphone signals over CresCAT-QM cable to a QuickMedia receiver or
switcher. For more information on QuickMedia refer to page 2.
RJ-45 QuickMedia Connector Pin Assignments
RJ-45 PIN WIRE COLORS
NUMBER
(EIA 568B)
1 WHITE/ORANGE
2 ORANGE
3 WHITE/GREEN
4 BLUE
5 WHITE/BLUE
6 GREEN
7 WHITE/BROWN
8 BROWN
NOTE: Always use CresCAT-QM cable to make QuickMedia connections.
NOTE: CresCAT-QM siamese cable includes four wires for making Cresnet
connections.
Ethernet
An 8-position RJ-45 port is used for connection to the Ethernet, providing local
area network or Web access (cable is not supplied).
RJ-45 Ethernet Port Pinouts
RJ-45 PIN SIGNALS
NUMBER
1 TD +
2 TD -
3 RD +
4 Connected to pin 5
5 Connected to pin 4
6 RD -
7 Connected to pin 8
8 Connected to pin 7
AC Power
Connect the six-foot (183 cm) grounded AC line cord to supply AC power to the
outlet on the topside of the QM-FTCC.
FlipTop Computer Center
QM ASSIGNMENT
RGB, COMPOSITE, COMPONENT
S-VIDEO, AND AUDIO
- RGB RED (- CHROMINANCE) (-P
+ RGB RED (+ CHROMINANCE) (+P
- RGB GREEN (- LUMINANCE) (-Y)
+ AUDIO
- AUDIO
+ RGB GREEN (+ LUMINANCE) (+Y)
- RGB BLUE (- COMPOSITE) (-P
+ RGB BLUE (+ COMPOSITE) (+P
FlipTop Computer Center: QM-FTCC • 11
)
R
)
R
)
B
)
B