Ground Wire Connections - Crestron QM-FTCC Operations & Installation Manual

FlipTop Computer Center Crestron QM-FTCC
Underside Connections

Ground Wire Connections

Proper grounding is required. Connect the ground from the QM transmitter
(QM-FTCC) to earth ground. Connect the Cresnet shield at the
QM-RMCRX-BA to the chassis ground provided on the QM-RMCRX-BA. The
QM-RMCRX-BA chassis must also be connected to an earth ground (building
steel). Refer to the following grounding diagram.
Ground Wire Connections
NOTE: Do not connect the shield to earth ground at the QM-FTCC.
22 • FlipTop Computer Center: QM-FTCC
Operations & Installation Guide - DOC. 6313A