Page 1 TSW-70 Series 5 in., 7 in., and 10.1 in. Wall Mount Touch Screens Product Manual Crestron Electronics, Inc.
Page 2 Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
Page 3: Table Of Contents
Contents Overview Features TSW-570 Features TSW-570P Features TSW-570PR Features TSW-770 Features TSW-770-GV Features TSW-770R Features TSW-1070 Features TSW-1070-GV Features TSW-1070R Features Physical Description Specifications TSW-570 Specifications Product Specifications Dimension Drawings TSW-570P Specifications Product Specifications Dimension Drawings TSW-570PR Specifications Product Specifications Dimension Drawings TSW-770 Specifications Product Specifications...
Page 4 Install the Mounting Bracket Install the Security Bracket (Optional) Connect the Touch Screen Mount the Touch Screen Configure the Touch Screen Configure the Crestron Home App TSW-770R and TSW-1070R Installation Install the Mounting Bracket Install the Security Bracket (Optional) Connect the Touch Screen...
Page 5 Virtual Toolbar Diagnostics & Advanced About Web Configuration Actions Menu Status Settings Security 802.1x Configuration Application Selection Connect to XiO Cloud Service Operation Resources Crestron Support and Training Programmer and Developer Resources Related Documentation Product Manual — Doc. 8550E Contents • v...
Page 6 vi • Contents Product Manual — Doc. 8550E...
Page 7: Overview
"touch screen" is used except where otherwise noted. Crestron offers the following variations for its standard touch screen models. Certain settings described in this document are not applicable to these models. The TSW-770-GV and TSW-1070-GV series touch screens eliminate the microphone, the Bluetooth®...
Page 8 TSW-570 Features The Crestron® TSW-570 is a stylish and versatile wall mount touch screen that is ideal for residential and enterprise applications. The TSW-570 features a 5 in. (127 mm) capacitive touch screen display with custom-programmable control buttons and support for Smart Graphics®...
Page 9 The touch screen comes preconfigured with virtual buttons for Power, Home, Lights, Up, and Down. Each button can be programmed via a Crestron control system to provide custom functionality, and unused buttons can be hidden individually.
Page 10 Crestron Home™ OS whole home solution. Select the Crestron Home app from the touch screen to control lighting, shades, climate, media, security, and cameras, including the ability to create and recall scenes that create a desired ambiance throughout a home. A TSW-570 may be installed in each room to provide easy access to various Crestron Home functions for both the room and the home.
Page 11 The TSW-570 is compatible with the XiO Cloud® service, which is an IoT (Internet of Things) based platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. Built on the Microsoft® Azure® software platform and utilizing...
Page 12: Tsw-570P Features
TSW-570P Features The Crestron® TSW-570P is a stylish and versatile portrait touch screen that is ideal for residential and enterprise applications. The TSW-570P features a portrait-oriented 5 in. (127 mm) capacitive touch screen display with custom-programmable control buttons and support for Smart Graphics®...
Page 13 The touch screen comes preconfigured with virtual buttons for Power, Home, Lights, Up, and Down. Each button can be programmed via a Crestron control system to provide custom functionality, and unused buttons can be hidden individually.
Page 14 Crestron Home™ OS whole home solution. Select the Crestron Home app from the touch screen to control lighting, shades, climate, media, security, and cameras, including the ability to create and recall scenes that create a desired ambiance throughout a home. A TSW-570P may be installed in each room to provide easy access to various Crestron Home functions for both the room and the home.
Page 15 The TSW-570P is compatible with the XiO Cloud® service, which is an IoT (Internet of Things) based platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. Built on the Microsoft® Azure® software platform and utilizing...
Page 16 TSW-570PR Features The Crestron® TSW-570PR is a stylish and versatile portrait touch screen that is designed specifically to run the Crestron Home™ OS application. The TSW-570PR features a portrait- oriented 5 in. (127 mm) capacitive touch screen display. PoE connectivity and a comprehensive assortment of mounting accessories simplify new and retrofit installations.
Page 17 The TSW-570PR offers a sleek and powerful user interface for controlling technology in the home via the Crestron Home app. The touch screen provides an intuitive interface that is fully customizable with easy-to-use capacitive controls, true feedback, and real-time status display.
Page 18 Optional Mounting Accessories The TSW-570PR is also compatible with Wall-Smart® flush wall mount products via a partnership with Crestron. For more information on supported Wall-Smart hardware, click here. Notes: 1. Item(s) sold separately. Refer to each product’s spec sheet for complete information.
Page 19: Tsw-770 Features
TSW-770 Features The Crestron® TSW-770 is a stylish and versatile wall mount touch screen that is ideal for residential and enterprise applications. The TSW-770 features a 7 in. (178 mm) capacitive touch screen display with custom-programmable control buttons and support for Smart Graphics®...
Page 20 Power, Home, Lights, Up, Down, and Microphone. Each button can be programmed via a Crestron control system to provide custom functionality, and unused buttons can be hidden individually. The universal status bar is expanded or hidden using simple swipe gestures on touch screen display.
Page 21 The Sonos app runs natively on the TSW-770, enabling enhanced control of Sonos products as part of a complete Crestron system. The app checks for updates nightly so it’s always current, and support for the Sonos S2 App is provided.
Page 22 The built-in Bluetooth® proximity detection beacon enhances the intelligence and personalization of a Crestron system by enabling a smartphone or tablet device to always know what room it is in. It works with the Crestron Go App and Crestron App to determine when the mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for the room.
Page 23 NOTE: Refer to the “Power” specifications for more details. Room Scheduling Accessories The TSW-770 provides dual high-speed USB 2.0 ports for connecting supported Crestron room scheduling accessories to the touch screen. TSW-770-LB series light bars provide a 180° visual indication of a room’s availability status, illuminating green if the room is available and red when reserved, with options for custom color mixing and programming.
Page 24 TSW-770/1070-RMB-1andTSW-770/1070-RMB-2 retrofit mounting brackets allow for retrofit installations in place of an older Crestron touch screen (APAD, CT-1000, LC-1000, TPS-4L, or TPS-2000L) without having to tear out the old mounting hardware or patch the wall.
Page 25 PP-100-W spec sheet. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with them.
Page 26: Tsw-770-Gv Features
TSW-770-GV Features The Crestron® TSW-770-GV is a stylish and versatile wall mount touch screen that is ideal for residential and enterprise applications. The TSW-770-GV features a 7 in. (178 mm) capacitive touch screen display with custom-programmable control buttons and support for Smart Graphics®...
Page 27 The touch screen comes preconfigured with virtual buttons for Power, Home, Lights, Up, and Down. Each button can be programmed via a Crestron control system to provide custom functionality, and unused buttons can be hidden individually.
Page 28 The Sonos app runs natively on the TSW-770-GV, enabling enhanced control of Sonos products as part of a complete Crestron system. The app checks for updates nightly so it’s always current, and support for the Sonos S2 App is provided.
Page 29 Crestron Home™ OS whole home solution. Select the Crestron Home app from the touch screen to control lighting, shades, climate, media, security, and cameras, including the ability to create and recall scenes that create a desired ambiance throughout a home. A TSW-770-GV may be installed in each room to provide easy access to various Crestron Home functions for both the room and the home.
Page 30 TSW-770/1070-RMB-1andTSW-770/1070-RMB-2 retrofit mounting brackets allow for retrofit installations in place of an older Crestron touch screen (APAD, CT-1000, LC-1000, TPS-4L, or TPS-2000L) without having to tear out the old mounting hardware or patch the wall.
Page 31: Tsw-770R Features
TSW-770R Features The Crestron® TSW-770R is a stylish and versatile wall mount touch screen that is designed specifically to run the Crestron Home™ OS application. The TSW-770R features a 7 in. (178 mm) capacitive touch screen display. PoE and Wi-Fi® network connectivity and a comprehensive assortment of mounting accessories simplify new and retrofit installations.
Page 32 The TSW-770R offers a sleek and powerful user interface for controlling technology in the home via the Crestron Home app. The touch screen provides an intuitive interface that is fully customizable with easy-to-use capacitive controls, true feedback, and real-time status display.
Page 33 TSW-770/1070-RMB-1andTSW-770/1070-RMB-2 retrofit mounting brackets allow for retrofit installations in place of an older Crestron touch screen (APAD, CT-1000, LC-1000, TPS-4L, or TPS-2000L) without having to tear out the old mounting hardware or patch the wall.
Page 34 4. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and TSW-BBI series back boxes, allowing the TSW-770R to be installed in place of a previous generation touch screen. 28 • TSW-70 Series Product Manual — Doc. 8550E...
Page 35: Tsw-1070 Features
TSW-1070 Features The Crestron® TSW-1070 is a stylish and versatile wall mount touch screen that is ideal for residential and enterprise applications. The TSW-1070 features a 7 in. (178 mm)10.1 in. (257 mm) capacitive touch screen display with custom-programmable control buttons and support for Smart Graphics®...
Page 36 Power, Home, Lights, Up, Down, and Microphone. Each button can be programmed via a Crestron control system to provide custom functionality, and unused buttons can be hidden individually. The universal status bar is expanded or hidden using simple swipe gestures on touch screen display.
Page 37 The Sonos app runs natively on the TSW-1070, enabling enhanced control of Sonos products as part of a complete Crestron system. The app checks for updates nightly so it’s always current, and support for the Sonos S2 App is provided.
Page 38 The built-in Bluetooth® proximity detection beacon enhances the intelligence and personalization of a Crestron system by enabling a smartphone or tablet device to always know what room it is in. It works with the Crestron Go App and Crestron App to determine when the mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for the room.
Page 39 PoE+ is required when connecting a light bar or hallway sign via USB. Refer to the “Power” specifications for more details. Room Scheduling Accessories The TSW-1070 provides dual high-speed USB 2.0 ports for connecting supported Crestron room scheduling accessories to the touch screen. TSW-1070-LB series light bars provide a 180°...
Page 40 The TSW-770/1070-RMB-1,TSW-770/1070-RMB-2, and TSW-1070-RMB-3, retrofit mounting brackets allow for retrofit installations in place of an older Crestron touch screen (APAD, CT-1000, LC-1000, TPS-4L, TPS-6L, or TPS-2000L) without having to tear out the old mounting hardware or patch the wall.
Page 41 PP-100-W spec sheet. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with them.
Page 42: Tsw-1070-Gv Features
TSW-1070-GV Features The Crestron® TSW-1070-GV is a stylish and versatile wall mount touch screen that is ideal for residential and enterprise applications. The TSW-1070-GV features a 10.1 in. (257 mm) capacitive touch screen display with custom-programmable control buttons and support for Smart Graphics®...
Page 43 Power, Home, Lights, Up, and Down. Each button can be programmed via a Crestron control system to provide custom functionality, and unused buttons can be hidden individually. The universal status bar is expanded or hidden using simple swipe gestures on touch screen display.
Page 44 The Sonos app runs natively on the TSW-1070-GV, enabling enhanced control of Sonos products as part of a complete Crestron system. The app checks for updates nightly so it’s always current, and support for the Sonos S2 App is provided.
Page 45 Crestron Home™ OS whole home solution. Select the Crestron Home app from the touch screen to control lighting, shades, climate, media, security, and cameras, including the ability to create and recall scenes that create a desired ambiance throughout a home. A TSW-1070-GV may be installed in each room to provide easy access to various Crestron Home functions for both the room and the home.
Page 46 The TSW-770/1070-RMB-1,TSW-770/1070-RMB-2, and TSW-1070-RMB-3, retrofit mounting brackets allow for retrofit installations in place of an older Crestron touch screen (APAD, CT-1000, LC-1000, TPS-4L, TPS-6L, or TPS-2000L) without having to tear out the old mounting hardware or patch the wall.
Page 47 TSW-1070-GV as they do on a tablet device. The TSW-1070-GV runs only one app, which is selected at setup. Only the apps approved and delivered by Crestron can run on the TSW-1070-GV. 6. A complete Zoom Rooms solution requires a mini PC or Mac computer running Zoom software, a Zoom Rooms subscription, plus additional peripherals and cables.
Page 48: Tsw-1070R Features
TSW-1070R Features The Crestron® TSW-1070R is a stylish and versatile wall mount touch screen that is designed specifically to run the Crestron Home™ OS application. The TSW-1070R features a 10.1 in. (257 mm) capacitive touch screen display. PoE and Wi-Fi® network connectivity and a comprehensive assortment of mounting accessories simplify new and retrofit installations.
Page 49 The TSW-1070R offers a sleek and powerful user interface for controlling technology in the home via the Crestron Home app. The touch screen provides an intuitive interface that is fully customizable with easy-to-use capacitive controls, true feedback, and real-time status display.
Page 50 The TSW-770/1070-RMB-1,TSW-770/1070-RMB-2, and TSW-1070-RMB-3, retrofit mounting brackets allow for retrofit installations in place of an older Crestron touch screen (APAD, CT-1000, LC-1000, TPS-4L, or TPS-2000L) without having to tear out the old mounting hardware or patch the wall.
Page 51 4. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and TSW-BBI series back boxes, allowing the TSW-1070R to be installed in place of a previous generation touch screen. Product Manual — Doc. 8550E TSW-70 Series • 45...
Page 52: Physical Description
Physical Description The TSW-70 Series provides the following connectors and indicators. TSW-570, TSW-770, and TSW-1070 Series Connectors TSW-570P Series Connectors Connectors and Indicators LAN PoE (1) 8-pin RJ45 connector, female, with 2 LED indicators; 100BASE-TX Ethernet port; PoE+ PD port; Green and yellow LEDs indicate Ethernet port status (2) USB Type A connectors, female;...
Page 53: Specifications
TSW-570P Specifications (on page 54) TSW-570PR Specifications (on page 59) TSW-770 Specifications (on page 63) TSW-770-GV Specifications (on page 69) TSW-770R Specifications (on page 75) TSW-1070 Specifications (on page 80) TSW-1070-GV Specifications (on page 86) TSW-1070R Specifications (on page 91) Product Manual — Doc. 8550E TSW-70 Series • 47...
Page 54: Tsw-570 Specifications
, native Crestron Home™ OS app, setup and diagnostics via web browser, cloud, or onscreen UI Room Scheduling Support Crestron Scheduling App Crestron Fusion® software, Microsoft Exchange Server® and Office 365®...
Page 55 TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, SNMP, IPv4 or IPv6, Active Directory® service authentication, HTTPS web browser setup, XiO Cloud® client, IEEE 802.3at compliant USB 2.0 host for room scheduling accessories Product Manual — Doc. 8550E TSW-70 Series • 49...
Page 56 Surface mount over a 2 in. H x 3-3/4 in. W (51 mm H x 96 mm W) cutout; 2-13/16 in. (72 mm) minimum mounting depth; 1-1/4 in. (32 mm) maximum mounting surface thickness; Pre/postconstruction mounting bracket assembly included; Back box and rack mount options sold separately 50 • TSW-70 Series Product Manual — Doc. 8550E...
Page 57 Depth 1.97 in. (50 mm) Dimensions do not include mounting bracket or add-on accessories Weight 8.82 oz (250 g) Compliance Regulatory Model: IC, CE, FCC Part 15 Class B digital device Product Manual — Doc. 8550E TSW-70 Series • 51...
Page 58: Dimension Drawings
Dimension Drawings 52 • TSW-70 Series Product Manual — Doc. 8550E...
Page 59 3. Room scheduling mode requires the TSW-570 to be designated exclusively for room scheduling use, which precludes use of certain features and functions described in this spec sheet. For design assistance, contact the Crestron True Blue support team at www.crestron.com/support. 4. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and TSW-BBI series back boxes, allowing the TSW-570 to be installed in place of a previous generation touch screen.
Page 60: Tsw-570P Specifications
, native Crestron Home™ OS app, setup and diagnostics via web browser, cloud, or onscreen UI Room Scheduling Support Crestron Scheduling App Crestron Fusion® software, Microsoft Exchange Server® and Office 365®...
Page 61 TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, SNMP, IPv4 or IPv6, Active Directory® service authentication, HTTPS web browser setup, XiO Cloud® client, IEEE 802.3at compliant USB 2.0 host for room scheduling accessories Product Manual — Doc. 8550E TSW-70 Series • 55...
Page 62 Surface mount over a 3-3/4 in. H x 2 in. W (96 mm H x 51 mm W) cutout; 2-13/16 in. (72 mm) minimum mounting depth; 1-1/4 in. (32 mm) maximum mounting surface thickness; Pre/postconstruction mounting bracket assembly included; Back box option sold separately 56 • TSW-70 Series Product Manual — Doc. 8550E...
Page 63: Dimension Drawings
5.02 in. (128 mm) Width 2.84 in. (72 mm) Depth 1.97 in. (50 mm) Weight 8.82 oz (250 g) Compliance Regulatory Model: M201923001 IC, CE, FCC Part 15 Class B digital device Dimension Drawings Product Manual — Doc. 8550E TSW-70 Series • 57...
Page 64 1. Room scheduling mode requires the TSW-570P to be designated exclusively for room scheduling use, which precludes use of certain features and functions described in this spec sheet. For design assistance, contact the Crestron True Blue support team at www.crestron.com/support. 2. Web browsing, weather information, and certain other functions require an Internet connection.
Page 65: Tsw-570Pr Specifications
Reset (1) Pin hole on rear panel for hardware reset Graphics Engine Native Crestron Home™ OS app, touch screen setup and diagnostics via web browser or onscreen UI, Crestron Home setup and diagnostics via Crestron Home Setup app Languages Onscreen Keyboard...
Page 66 Surface mount over a 3-3/4 in. H x 2 in. W (96 mm H x 51 mm W) cutout; 2-13/16 in. (72 mm) minimum mounting depth; 1-1/4 in. (32 mm) maximum mounting surface thickness; Pre/postconstruction mounting bracket assembly included; Back box option sold separately Dimensions 60 • TSW-70 Series Product Manual — Doc. 8550E...
Page 67: Dimension Drawings
5.02 in. (128 mm) Width 2.84 in. (72 mm) Depth 1.97 in. (50 mm) Weight 8.82 oz (250 g) Compliance Regulatory Model: M201923001 IC, CE, FCC Part 15 Class B digital device Dimension Drawings Product Manual — Doc. 8550E TSW-70 Series • 61...
Page 68 2. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and TSW-BBI series back boxes, allowing the TSW-570PR to be installed in place of a previous generation touch screen. 62 • TSW-70 Series Product Manual — Doc. 8550E...
Page 69: Tsw-770 Specifications
UI Room Scheduling Support Crestron Scheduling App Crestron Fusion® software, Microsoft Exchange Server® and Office 365® software, Google Calendar™ calendaring app and G Suite™ software, CollegeNET® 25Live® software, and Ad Astra™ software (IBM® Notes® software...
Page 70 English (US), English (UK), French, German, Hebrew, Italian, Japanese, Korean, Norwegian, Portuguese (Brazil), Portuguese (Portugal), Russian, Spanish, Swedish Memory 2 GB LPDDR3 Storage Firmware/Application: 16 GB eMMC pSLC Maximum Project Size 600 MB 64 • TSW-70 Series Product Manual — Doc. 8550E...
Page 71 Green and yellow LEDs indicate Ethernet port status (2) USB Type A connectors, female; USB 2.0 host ports; For optional room scheduling accessories NOTE: The touch screen supports the use of a single light bar or status indicator accessory. Product Manual — Doc. 8550E TSW-70 Series • 65...
Page 72 1.99 in. (51 mm) Dimensions do not include mounting bracket or add-on accessories Weight 14.11 oz (400 g) Compliance Regulatory Model: M201923002 IC, CE, FCC Part 15 Class B digital device 66 • TSW-70 Series Product Manual — Doc. 8550E...
Page 73: Dimension Drawings
Dimension Drawings Product Manual — Doc. 8550E TSW-70 Series • 67...
Page 74 PP-100-W spec sheet. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with them.
Page 75: Tsw-770-Gv Specifications
UI Room Scheduling Support Crestron Scheduling App Crestron Fusion® software, Microsoft Exchange Server® and Office 365® software, Google Calendar™ calendaring app and G Suite™ software, CollegeNET® 25Live® software, and Ad Astra™ software (IBM® Notes® software...
Page 76 TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, SNMP, IPv4 or IPv6, Active Directory® service authentication, HTTPS web browser setup, IEEE 802.3at compliant USB 2.0 host for room scheduling accessories 70 • TSW-70 Series Product Manual — Doc. 8550E...
Page 77 49073) electrical box, or 2-gang UK (BS 4662) electrical box; Lectern mount over a 2 in. H x 3-3/4 in. W (51 mm H x 96 mm W) cutout; 1-3/8 in. (35 mm) minimum mounting depth; Wall mount, surface mount, and rack options available separately Product Manual — Doc. 8550E TSW-70 Series • 71...
Page 78 1.99 in. (51 mm) Dimensions do not include mounting bracket or add-on accessories Weight 14.11 oz (400 g) Compliance Regulatory Model: M201923002 IC, CE, FCC Part 15 Class B digital device 72 • TSW-70 Series Product Manual — Doc. 8550E...
Page 79: Dimension Drawings
Dimension Drawings Product Manual — Doc. 8550E TSW-70 Series • 73...
Page 80 Visit zoom.us/zoomrooms for more information about Zoom Rooms capabilities, hardware requirements, and subscription plans. For design assistance, contact the Crestron True Blue support team at www.crestron.com/support. 7. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and TSW-BBI series back boxes, allowing the TSW-770-GV to be installed in place of a previous generation touch screen.
Page 81: Tsw-770R Specifications
(1) Pin hole on rear panel for hardware reset Graphics Engine Native Sonos® app , native Crestron Home™ OS app, touch screen setup and diagnostics via web browser or onscreen UI, Crestron Home setup and diagnostics via Crestron Home Setup app Languages...
Page 82 LAN PoE (1) 8-pin RJ45 connector, female, with 2 LED indicators; 100BASE-TX Ethernet port; PoE+ PD port; Green and yellow LEDs indicate Ethernet port status (2) USB Type A connectors, female; USB 2.0 host ports 76 • TSW-70 Series Product Manual — Doc. 8550E...
Page 83 1.99 in. (51 mm) Dimensions do not include mounting bracket or add-on accessories Weight 14.11 oz (400 g) Compliance Regulatory Model: M201923002 IC, CE, FCC Part 15 Class B digital device Product Manual — Doc. 8550E TSW-70 Series • 77...
Page 84: Dimension Drawings
Dimension Drawings 78 • TSW-70 Series Product Manual — Doc. 8550E...
Page 85 4. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and TSW-BBI series back boxes, allowing the TSW-770R to be installed in place of a previous generation touch screen. Product Manual — Doc. 8550E TSW-70 Series • 79...
Page 86: Tsw-1070 Specifications
, native Sonos® app , native Zoom Rooms™ app , native Microsoft Teams® app, native Crestron Home™ OS app, setup and diagnostics via web browser, cloud, or onscreen UI Room Scheduling Support Crestron Scheduling App Crestron Fusion® software, Microsoft Exchange Server® and Office 365®...
Page 87 English (US), English (UK), French, German, Hebrew, Italian, Japanese, Korean, Norwegian, Portuguese (Brazil), Portuguese (Portugal), Russian, Spanish, Swedish Memory 2 GB LPDDR3 Storage Firmware/Application: 16 GB eMMC pSLC Maximum Project Size 600 MB Product Manual — Doc. 8550E TSW-70 Series • 81...
Page 88 Green and yellow LEDs indicate Ethernet port status (2) USB Type A connectors, female; USB 2.0 host ports; For optional room scheduling accessories NOTE: The touch screen supports the use of a single light bar or status indicator accessory. 82 • TSW-70 Series Product Manual — Doc. 8550E...
Page 89 Wall mount, surface mount, and rack options available separately Dimensions Height 5.87 in. (149 mm) Width 9.46 in. (240 mm) Depth 2.01 in. (51 mm) Dimensions do not include mounting bracket or add-on accessories Weight 1.61 lb (730 g) Product Manual — Doc. 8550E TSW-70 Series • 83...
Page 90: Dimension Drawings
Compliance Regulatory Model: M201923003 IC, CE, FCC Part 15 Class B digital device Dimension Drawings 84 • TSW-70 Series Product Manual — Doc. 8550E...
Page 91 PP-100-W spec sheet. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. Crestron Bluetooth beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with them.
Page 92: Tsw-1070-Gv Specifications
, native Sonos® app , native Zoom Rooms™ app , native Microsoft Teams® app, native Crestron Home™ OS app, setup and diagnostics via web browser, cloud, or onscreen UI Room Scheduling Support Crestron Scheduling App Crestron Fusion® software, Microsoft Exchange Server® and Office 365®...
Page 93 TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, SNMP, IPv4 or IPv6, Active Directory® service authentication, HTTPS web browser setup, IEEE 802.3at compliant USB 2.0 host for room scheduling accessories Product Manual — Doc. 8550E TSW-70 Series • 87...
Page 94 32 to 104 °F (0 to 40 °C) Humidity 10% to 95% RH (noncondensing) Heat Dissipation 44 BTU/hr Construction Housing Plastic, smooth black or white finish, edge-to-edge glass with black or white surround 88 • TSW-70 Series Product Manual — Doc. 8550E...
Page 95: Dimension Drawings
2.01 in. (51 mm) Dimensions do not include mounting bracket or add-on accessories Weight 1.61 lb (730 g) Compliance Regulatory Model: M201923003 IC, CE, FCC Part 15 Class B digital device Dimension Drawings Product Manual — Doc. 8550E TSW-70 Series • 89...
Page 96 TSW-1070-GV as they do on a tablet device. The TSW-1070-GV runs only one app, which is selected at setup. Only the apps approved and delivered by Crestron can run on the TSW-1070-GV. 6. A complete Zoom Rooms solution requires a mini PC or Mac computer running Zoom software, a Zoom Rooms subscription, plus additional peripherals and cables.
Page 97: Tsw-1070R Specifications
(1) Pin hole on rear panel for hardware reset Graphics Engine Native Sonos® app , native Crestron Home™ OS app, touch screen setup and diagnostics via web browser or onscreen UI, Crestron Home setup and diagnostics via Crestron Home Setup app Languages...
Page 98 LAN PoE (1) 8-pin RJ45 connector, female, with 2 LED indicators; 100BASE-TX Ethernet port; PoE+ PD port; Green and yellow LEDs indicate Ethernet port status (2) USB Type A connectors, female; USB 2.0 host ports 92 • TSW-70 Series Product Manual — Doc. 8550E...
Page 99 2.01 in. (51 mm) Dimensions do not include mounting bracket or add-on accessories Weight 1.61 lb (730 g) Compliance Regulatory Model: M201923003 IC, CE, FCC Part 15 Class B digital device Product Manual — Doc. 8550E TSW-70 Series • 93...
Page 100: Dimension Drawings
4. The TSW-UMB-70 is also compatible with older TSW-UMB-PMK series preconstruction mounting kits and TSW-BBI series back boxes, allowing the TSW-1070R to be installed in place of a previous generation touch screen. 94 • TSW-70 Series Product Manual — Doc. 8550E...
Page 101: Installation
Installation Refer to the following sections for instructions on how to install the various TSW-70 Series models. TSW-570, TSW-770, and TSW-1070 Installation (on page 96) TSW-570P Installation (on page 107) TSW-770-GV and TSW-1070-GV Installation (on page 116) TSW-570PR Installation (on page 124) TSW-770R and TSW-1070R Installation (on page 131) Product Manual —...
Page 102: Tsw-570, Tsw-770, And Tsw-1070 Installation
1. Use the TSW-UMB-70-PMK mounting bracket as a cutout template by turning the bracket to face the wall, ensuring it is level, and tacking it to the wall temporarily with finishing nails (not included) through the smaller holes around the cutout opening. 96 • TSW-70 Series Product Manual — Doc. 8550E...
Page 103 5. Push the rear half of the mounting bracket back so that it is seated behind the mounting surface completely. 6. Ensure the front of the TSW-UMB-70 is level, and then tighten the two bracket screws. Product Manual — Doc. 8550E TSW-70 Series • 97...
Page 104 2-gang European electrical box, or a 2-gang U.K. electrical box. The touch screen also installs into drywall. NOTES: Additional mounting options are possible using the following mounting accessories. For more information, refer to the product pages at www.crestron.com. TSW-UMB-70 universal mounting bracket TSW-UMB-70-PMK preconstruction mounting kit TSW-UMB-70-BBI wall mount back box...
Page 105 3. Use one of the anchors to make a center mark in the drywall through the four 2-gang openings in the template. Refer to the image below for the required mounting holes. 4. Screw the four anchors into the drywall using the center marks as a reference. Product Manual — Doc. 8550E TSW-70 Series • 99...
Page 106: Install The Security Bracket (Optional)
Use the two M2 x 4 mm screws to attach the security bracket to the touch screen rear housing as shown in the following illustration. 100 • TSW-70 Series Product Manual — Doc. 8550E...
Page 107: Connect The Touch Screen
Observe the following when connecting the touch screen: Power and data connection is provided to the touch screen by a single Ethernet cable. A Crestron PoE (Power over Ethernet) power supply, such as the PWE-4803RU, or a PoE- capable network switch is recommended (neither included).
Page 108: Mount The Touch Screen
Wipe the touch screen clean and avoid ingress of moisture beneath the bezels. 102 • TSW-70 Series Product Manual — Doc. 8550E...
Page 109: Configure The Touch Screen
Use the setup screens to configure various settings for the touch screen, including Ethernet setup, IP table setup, audio setup, display setup, standby timeout, application selection, Wi-Fi network setup, diagnostics, the Bluetooth® beacon, and the virtual toolbar (model dependent). Product Manual — Doc. 8550E TSW-70 Series • 103...
Page 110 To access the web configuration interface using the touch screen IP address: 1. Ensure that the touch screen is connected to the network. 2. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its IP address on the network.
Page 111: Select An Application
The first time the web configuration interface is accessed, a dialog box is displayed asking the user to create an admin account. A similar message is displayed when connecting to the device in Crestron Toolbox software if an admin account has not already been created. To create an admin account: 1.
Page 112 3. Click Confirm. The touch screen reboots to display the user interface for the selected application. If a custom user project will be used, tap User Project. Custom user projects can be uploaded using the web configuration interface or Crestron Toolbox software. 106 • TSW-70 Series Product Manual — Doc. 8550E...
Page 113: Tsw-570P Installation
Additional mounting options are possible using the TSW-UMB-70 universal mounting bracket, TSW-UMB-570P-PMK preconstruction mounting kit, or TSW-UMB-70-BBI wall mount back box. For more information, refer to the product pages at www.crestron.com. Preconstruction Installations To install the TSW-570P mounting bracket in preconstruction applications, use standard drywall nails or screws (not included) to attach the TSW-UMB-570P-PMK mounting bracket to a wall...
Page 114 5. Push the rear half of the mounting bracket back so that it is seated behind the mounting surface completely. 6. Ensure the front of the TSW-UMB-70 is level, and then tighten the two bracket screws. 108 • TSW-70 Series Product Manual — Doc. 8550E...
Page 115: Install The Security Bracket (Optional)
To remove the touch screen after installation, use the included release key to push down on the security bracket release tabs as shown in the following illustration while gently pulling the touch screen away from the mounting bracket. Product Manual — Doc. 8550E TSW-70 Series • 109...
Page 116: Connect The Touch Screen
Observe the following when connecting the touch screen: Power and data connection is provided to the touch screen by a single Ethernet cable. A Crestron PoE (Power over Ethernet) power supply, such as the PWE-4803RU, or a PoE- capable network switch is recommended (neither included).
Page 117: Configure The Touch Screen
Wipe the touch screen clean and avoid ingress of moisture beneath the bezels. Configure the Touch Screen When power is applied for the first time, the following screen is displayed. The touch screen may take up to two minutes to boot. Product Manual — Doc. 8550E TSW-70 Series • 111...
Page 118 The touch screen provides a web configuration interface that is used to view and configure various touch screen settings and to select an application. The interface can be accessed using the touch screen IP address or the XiO Cloud® service. 112 • TSW-70 Series Product Manual — Doc. 8550E...
Page 119 To access the web configuration interface using the touch screen IP address: 1. Ensure that the touch screen is connected to the network. 2. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its IP address on the network.
Page 120: Select An Application
The first time the web configuration interface is accessed, a dialog box is displayed asking the user to create an admin account. A similar message is displayed when connecting to the device in Crestron Toolbox software if an admin account has not already been created. To create an admin account: 1.
Page 121 3. Click Confirm. The touch screen reboots to display the user interface for the selected application. If a custom user project will be used, tap User Project. Custom user projects can be uploaded using the web configuration interface or Crestron Toolbox software. Product Manual — Doc. 8550E TSW-70 Series • 115...
Page 122: Tsw-770-Gv And Tsw-1070-Gv Installation
2-gang European electrical box, or a 2-gang U.K. electrical box. The touch screen also installs into drywall. NOTES: Additional mounting options are possible using the following mounting accessories. For more information, refer to the product pages at www.crestron.com. TSW-UMB-70 universal mounting bracket TSW-UMB-70-PMK preconstruction mounting kit TSW-UMB-70-BBI wall mount back box...
Page 123 3. Use one of the anchors to make a center mark in the drywall through the four 2-gang openings in the template. Refer to the image below for the required mounting holes. 4. Screw the four anchors into the drywall using the center marks as a reference. Product Manual — Doc. 8550E TSW-70 Series • 117...
Page 124: Install The Security Bracket (Optional)
Use the two M2 x 4 mm screws to attach the security bracket to the touch screen rear housing as shown in the following illustration. 118 • TSW-70 Series Product Manual — Doc. 8550E...
Page 125: Connect The Touch Screen
Observe the following when connecting the touch screen: Power and data connection is provided to the touch screen by a single Ethernet cable. A Crestron PoE (Power over Ethernet) power supply, such as the PWE-4803RU, or a PoE- capable network switch is recommended (neither included).
Page 126: Mount The Touch Screen
Wipe the touch screen clean and avoid ingress of moisture beneath the bezels. 120 • TSW-70 Series Product Manual — Doc. 8550E...
Page 127: Configure The Touch Screen
Use the setup screens to configure various settings for the touch screen, including Ethernet setup, IP table setup, audio setup, display setup, standby timeout, application selection, diagnostics, and the virtual toolbar. Product Manual — Doc. 8550E TSW-70 Series • 121...
Page 128 To access the web configuration interface using the touch screen IP address: 1. Ensure that the touch screen is connected to the network. 2. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its IP address on the network.
Page 129: Select An Application
3. Click Confirm. The touch screen reboots to display the user interface for the selected application. If a custom user project will be used, tap User Project. Custom user projects can be uploaded using the web configuration interface or Crestron Toolbox software. Product Manual — Doc. 8550E TSW-70 Series • 123...
Page 130: Tsw-570Pr Installation
Additional mounting options are possible using the TSW-UMB-70 universal mounting bracket, TSW-UMB-570P-PMK preconstruction mounting kit, or TSW-UMB-70-BBI wall mount back box. For more information, refer to the product pages at www.crestron.com. Preconstruction Installations To install the TSW-570PR mounting bracket in preconstruction applications, use standard drywall nails or screws (not included) to attach the TSW-UMB-570P-PMK mounting bracket to a...
Page 131 5. Push the rear half of the mounting bracket back so that it is seated behind the mounting surface completely. 6. Ensure the front of the TSW-UMB-70 is level, and then tighten the two bracket screws. Product Manual — Doc. 8550E TSW-70 Series • 125...
Page 132: Install The Security Bracket (Optional)
To remove the touch screen after installation, use the included release key to push down on the security bracket release tabs as shown in the following illustration while gently pulling the touch screen away from the mounting bracket. 126 • TSW-70 Series Product Manual — Doc. 8550E...
Page 133: Connect The Touch Screen
Observe the following when connecting the touch screen: Power and data connection is provided to the touch screen by a single Ethernet cable. A Crestron PoE (Power over Ethernet) power supply, such as the PWE-4803RU, or a PoE- capable network switch is recommended (neither included).
Page 134: Configure The Touch Screen
Configure the Touch Screen When power is applied for the first time, the touch screen boots to the Crestron Home application setup screen. The touch screen may take up to two minutes to boot. Device settings for the touch screen may be configured using the built-in setup screens or the web configuration interface.
Page 135 To access the web configuration interface using the touch screen IP address: 1. Ensure that the touch screen is connected to the network. 2. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its IP address on the network.
Page 136: Configure The Crestron Home App
Configure the Crestron Home App The touch screen ships with the Crestron Home user control application running out of the box. The application must be paired with an existing Crestron Home system prior to use.
Page 137: Tsw-770R And Tsw-1070R Installation
2-gang European electrical box, or a 2-gang U.K. electrical box. The touch screen also installs into drywall. NOTES: Additional mounting options are possible using the following mounting accessories. For more information, refer to the product pages at www.crestron.com. TSW-UMB-70 universal mounting bracket TSW-UMB-70-PMK preconstruction mounting kit TSW-UMB-70-BBI wall mount back box...
Page 138 3. Use one of the anchors to make a center mark in the drywall through the four 2-gang openings in the template. Refer to the image below for the required mounting holes. 4. Screw the four anchors into the drywall using the center marks as a reference. 132 • TSW-70 Series Product Manual — Doc. 8550E...
Page 139: Install The Security Bracket (Optional)
Use the two M2 x 4 mm screws to attach the security bracket to the touch screen rear housing as shown in the following illustration. Product Manual — Doc. 8550E TSW-70 Series • 133...
Page 140: Connect The Touch Screen
Observe the following when connecting the touch screen: Power and data connection is provided to the touch screen by a single Ethernet cable. A Crestron PoE (Power over Ethernet) power supply, such as the PWE-4803RU, or a PoE- capable network switch is recommended (neither included).
Page 141: Mount The Touch Screen
Wipe the touch screen clean and avoid ingress of moisture beneath the bezels. Product Manual — Doc. 8550E TSW-70 Series • 135...
Page 142: Configure The Touch Screen
Configure the Touch Screen When power is applied for the first time, the touch screen boots to the Crestron Home application setup screen. The touch screen may take up to two minutes to boot. Device settings for the touch screen may be configured using the built-in setup screens or the web configuration interface.
Page 143: Configure The Crestron Home App
Configure the Crestron Home App The touch screen ships with the Crestron Home user control application running out of the box. The application must be paired with an existing Crestron Home system prior to use.
Page 144: Configuration
When power is applied for the first time, the following screen is displayed. The touch screen may take up to two minutes to boot. NOTE: TSW-70R series touch screens boot to the Crestron Home application setup screen. For more information on configuring the Crestron Home application, refer to the Crestron Home OS™...
Page 145 To configure the device using the built-in setup screens, refer to Local Configuration (on page 140). To configure the device using the web configuration interface, refer to Web Configuration page 175). Product Manual — Doc. 8550E TSW-70 Series • 139...
Page 146: Local Configuration
Wi-Fi® network setup, diagnostics, Bluetooth® beacon configuration, and the virtual toolbar (model dependent). A button to toggle system messages on or off An About button that provides information about the touch screen. 140 • TSW-70 Series Product Manual — Doc. 8550E...
Page 147 Setup screen and a Save & Exit button that may be tapped to save all settings, to exit the setup screens, and to return to the selected scheduling application. Product Manual — Doc. 8550E TSW-70 Series • 141...
Page 148: Ethernet Setup
Tap REBOOT to exit setup mode and reboot the touch screen. To change a static IP address, tap Off under DHCP Enable. Then, tap Set Static IP Address Settings to display the Static IP Ethernet Setup screen. 142 • TSW-70 Series Product Manual — Doc. 8550E...
Page 149 Static IP Ethernet Setup Screen To edit the static IP address, the static subnet mask, the static default router, the preferred DNS, or the alternate preferred DNS, tap the text field underneath the setting name. Product Manual — Doc. 8550E TSW-70 Series • 143...
Page 150 Tap REBOOT to exit setup mode and reboot the touch screen. Tap < BACK to return to the Ethernet Setup screen. Tap < BACK on the Ethernet Setup screen to return to the Setup screen. 144 • TSW-70 Series Product Manual — Doc. 8550E...
Page 151: Ip Table Setup
The Ethernet Setup - IP Table screen also provides an Online indicator for each IP table entry. (Green indicates that the control system is online.) Product Manual — Doc. 8550E TSW-70 Series • 145...
Page 152 To add or edit an entry, tap Add/Edit next to the corresponding entry. The Ethernet Setup - Edit IP Table screen is displayed. Ethernet Setup - Edit IP Table Screen Tap the CIP ID text field to display the on-screen hex keypad. On-Screen Hex Keypad 146 • TSW-70 Series Product Manual — Doc. 8550E...
Page 153 Tap < BACK on the Ethernet Setup - Edit IP Table screen to return to the Ethernet Setup - IP Table screen. Tap < BACK on the Ethernet Setup - IP Table screen to return to the Setup screen Product Manual — Doc. 8550E TSW-70 Series • 147...
Page 154: Audio Setup
Tap the up and down arrow buttons to raise or lower the touch screen beep volume incrementally from 0 to 100%. Tap Beep On or Beep Off to turn the beep volume on or off. Tap < BACK to return to the Setup screen. 148 • TSW-70 Series Product Manual — Doc. 8550E...
Page 155: Display Setup
Tap On or Off under Proximity Wake to turn proximity waking on or off for the display. When proximity waking is on, the touch screen will wake from standby automatically when a user gets within proximity of the touch screen. Product Manual — Doc. 8550E TSW-70 Series • 149...
Page 156 Tap Low or High to set the brightness level to low or high, respectively, for the LCD display. Tap < BACK to return to the Display Setup screen. Tap < BACK on the Display Setup screen to return to the Setup screen. 150 • TSW-70 Series Product Manual — Doc. 8550E...
Page 157: Standby Timeout
Tap the up and down arrow buttons to increase the touch screen standby timeout duration from 0 to 120 minutes. Tap Screen Saver Options to display the Standby Screensaver screen. Standby Screensaver Screen Product Manual — Doc. 8550E TSW-70 Series • 151...
Page 158: Application Selection
Each application uses a unique setup procedure for registering and configuring the application. For more information on setting up each application, refer to Application Selection page 213). Tap < BACK to return to the Setup screen. 152 • TSW-70 Series Product Manual — Doc. 8550E...
Page 159: Wi-Fi Setup
Tap Set Hostname to enter a new touch screen hostname using an on-screen keyboard. Tap APPLY CHANGES to apply any new Wi-Fi settings to the touch screen and to stay in setup mode. Tap REBOOT to exit setup mode and reboot the touch screen. Product Manual — Doc. 8550E TSW-70 Series • 153...
Page 160 To edit the static IP address, the static subnet mask, the static default router, the preferred DNS, or the alternate preferred DNS, tap the text field underneath the setting name. The on-screen numeric keypad opens for the chosen setting. Edit IP Address On-Screen Numeric Keypad 154 • TSW-70 Series Product Manual — Doc. 8550E...
Page 161 Use the Connect to a Wi-Fi Access Point (1-2-3) screen to connect the touch screen to an existing WAP that is in range or to configure a new WAP. Any WAPs that are in range and discoverable are displayed under Step 1 - Select a WAP upon successful discovery. Product Manual — Doc. 8550E TSW-70 Series • 155...
Page 162 6. Tap the Password text field to display an on-screen keyboard. 7. Enter the password used to connect to the WAP, and then tap SAVE. 8. Tap Step 3 - Make this my Access Point. The Wi-Fi WAP Selection screen is displayed. 156 • TSW-70 Series Product Manual — Doc. 8550E...
Page 163 WAP may be deleted, or tap < BACK to cancel adding the new WAP. For more information, refer to Manage Wi-Fi Access Points (on the next page). Tap < BACK to return to the Wi-Fi Setup screen. Product Manual — Doc. 8550E TSW-70 Series • 157...
Page 164 Tap Delete this Access Point to delete the selected WAP. If a WAP is deleted, it must be added back to the list using the procedures described in Select a Wi-Fi Access Point (on page 155). Tap < BACK to return to the Wi-Fi Setup screen. 158 • TSW-70 Series Product Manual — Doc. 8550E...
Page 165: Bluetooth Beacon
Use the BLE Beacon screen to configure the built-in PinPoint™ proximity detection beacon. Using Bluetooth® technology, the beacon works with the Crestron App or Crestron PinPoint App to determine when a mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for the room.
Page 166: Virtual Toolbar
The toolbar is hidden automatically after a set timeout duration. NOTE: Virtual button functionality can be custom programmed using a Crestron control system. 160 • TSW-70 Series...
Page 167 Tap Toolbar Buttons to display a screen for showing or hiding individual buttons in the virtual toolbar. Tap On or Off next to a button to show or hide the button, respectively. Product Manual — Doc. 8550E TSW-70 Series • 161...
Page 168 On-screen Toolbar Screen - Toolbar Buttons Tap < BACK to return to the Setup screen. 162 • TSW-70 Series Product Manual — Doc. 8550E...
Page 169: Diagnostics & Advanced
Use the Diagnostics & Advanced screen to access various diagnostic test screens for the touch screen. The Diagnostics & Advanced screen also provides the touch screen CPU temperature and available memory. Each test screen is described in the sections that follow. Product Manual — Doc. 8550E TSW-70 Series • 163...
Page 170 Use the Test Pattern Diagnostics screen to display any of the available test patterns. Tap one of the buttons on the screen to display its respective test pattern. Tap < BACK to return to the Diagnostics & Advanced screen. 164 • TSW-70 Series Product Manual — Doc. 8550E...
Page 171 Use the touch test screen to test the touch functionality of the display. When a location button is tapped, its respective indicator lights on the screen. Tap RETURN to return to the Diagnostics & Advanced screen. Product Manual — Doc. 8550E TSW-70 Series • 165...
Page 172 Tap the up and down arrow buttons under Volume to raise or lower the media volume incrementally from 0 to 100%. Tap On or Off under Mute to mute or unmute the media volume. Tap < BACK to return to the Diagnostics & Advanced screen. 166 • TSW-70 Series Product Manual — Doc. 8550E...
Page 173 The connection data updates after every successive ping. Tap < BACK to return to the Diagnostics & Advanced screen. Product Manual — Doc. 8550E TSW-70 Series • 167...
Page 174 When one of the virtual buttons is pressed on the touch screen, its respective indicator lights on the screen. Tap < BACK to return to the Diagnostics & Advanced screen. 168 • TSW-70 Series Product Manual — Doc. 8550E...
Page 175 If the intercom does not function, there is an issue with the intercom settings. Use the buttons on the left and right of the screen to view or control various call settings. Product Manual — Doc. 8550E TSW-70 Series • 169...
Page 176 NOTE: The touch screen Rava SIP intercom may be configured to connect to a supported door station as part of a Crestron Home™ OS door station solution. For more information, refer to Crestron Home OS™ Product Manual.
Page 177 When the second playback is finished, the display automatically returns to the Diagnostics & Advanced screen. Tap < BACK on the Diagnostics & Advanced screen to return to the Setup screen. Product Manual — Doc. 8550E TSW-70 Series • 171...
Page 178 The connection data updates after every successive ping. Tap < BACK to return to the Diagnostics & Advanced screen. 172 • TSW-70 Series Product Manual — Doc. 8550E...
Page 179: About
NOTE: The Check For App Updates button is shown only if an application is running on the touch screen. Tap RESTORE at the top right of the screen to restore the touch screen to its default factory settings. Tap < BACK to return to the Setup screen. Product Manual — Doc. 8550E TSW-70 Series • 173...
Page 180 174 • TSW-70 Series Product Manual — Doc. 8550E...
Page 181: Web Configuration
Connect to XiO Cloud Service (on page 215). To access the configuration interface: 1. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen and its IP address on the network. 2. Open a web browser. 3. Enter the touch screen IP address into the browser URL field. The configuration interface is displayed (TSW-1070 shown).
Page 182: Actions Menu
Some device settings may be displayed or hidden depending on the selected application mode. If the Crestron room scheduling application is running on the touch screen, the web configuration utility provides additional configuration options for the room scheduling application. For more...
Page 183 Manage Certificates Click Manage Certificates to manage any certificates that are installed on the touch screen. For more information on certificate management, refer to 802.1x Configuration (on page 210). Product Manual — Doc. 8550E TSW-70 Series • 177...
Page 184 Click the x button to close the Project Upload dialog box at any time during the upgrade process. Clicking the x button before the project file is uploaded to the touch screen cancels the upload. 178 • TSW-70 Series Product Manual — Doc. 8550E...
Page 185 Project Upload dialog box opens. Project Upload Dialog Box NOTE: This selection is available only if the touch screen is running in Crestron Default scheduling mode. To upload a custom scheduling project: 1. Click Browse, and then navigate to the project .vtz file on the host computer.
Page 186: Status
Click + More details at the bottom of the Device tab to display an expanded section that shows additional touch screen information. If + More Details is selected, click - Less details to collapse the section. 180 • TSW-70 Series Product Manual — Doc. 8550E...
Page 187 IP Address: The touch screen IP address, shown only if an Ethernet connection is enabled Subnet Mask: The touch screen subnet mask address, shown only if an Ethernet connection is enabled Default Gateway: The gateway router address, shown only if an Ethernet connection is enabled Product Manual — Doc. 8550E TSW-70 Series • 181...
Page 188 Click USB to view the status of a connected USB accessory, such as a room scheduling hallway sign or light bar. Status Tab - USB The following USB information is displayed: Accessory Connected: The name of the connected accessory Accessory Type: The type of connected accessory 182 • TSW-70 Series Product Manual — Doc. 8550E...
Page 189 Room Status: The status of the connected room (available or reserved) Calendar Sync: The status of the sync between the touch screen and the room scheduling calendar Crestron Fusion Online Status: The status of the Crestron Fusion connection (if applicable) Display Click Display to view the display status.
Page 190 IP Address/Hostname: The control system IP address or hostname Room ID: The control system room ID that the touch screen is associated with (for connections to the Crestron Virtual Control server-based control system) Status: The control system connection status 184 • TSW-70 Series...
Page 191: Settings
Red text is displayed next a setting to indicate an invalid value. System Setup Click System Settings to configure general network and touch screen settings. Settings Tab - System Setup Product Manual — Doc. 8550E TSW-70 Series • 185...
Page 192 If an authentication method is selected, enter the ID for the key used to authenticate against the SNTP server into the Key ID text field. To remove an entry, fill the checkbox to the left of the table entry, and then click Delete. 186 • TSW-70 Series Product Manual — Doc. 8550E...
Page 193 Date Format: Select the format that the date will display on the touch screen using the drop-down menu. Time: Select the time for the touch screen (in 24-hour format) using the pop-up menu that is displayed. Product Manual — Doc. 8550E TSW-70 Series • 187...
Page 194 Settings Tab - System Setup (Network) NOTE: The IP Address, Subnet Mask, and Default Gateway fields are required only if DHCP is set to Disabled for Ethernet and Wi-Fi network connection. 188 • TSW-70 Series Product Manual — Doc. 8550E...
Page 195 Click Add to add a new entry to the Wi-Fi access point table. After selecting one more entries in the Wi-Fi access point table, click Remove to delete the selected entries. Product Manual — Doc. 8550E TSW-70 Series • 189...
Page 196 Click the + (plus) icon next to Device Display to display the following device display settings. Settings Tab - System Setup (Device Display) 190 • TSW-70 Series Product Manual — Doc. 8550E...
Page 197 Text Font Face: Use the drop-down menu to select a font for the screensaver text. Product Manual — Doc. 8550E TSW-70 Series • 191...
Page 198 Video URL: Enter a URL of video to be used by the touch screen screensaver. Logo Setting: Select one of the radio buttons (None, Crestron, and Custom) to select a logo type to use on the touch screen screensaver. Logo URL: If Logo Setting is set to Custom, enter a URL of a custom logo to be used by the touch screen screensaver.
Page 199 Cloud server. This connection is only applicable when the scheduling mode is set to Crestron Default or User Project. Crestron Fusion Cloud URL: Enter the URL used to connect the touch screen to the desired Crestron Fusion Cloud server. Product Manual — Doc. 8550E...
Page 200 HTTPS Proxy Port: Enter the port number of the HTTPS proxy server. Username: Enter the username required for the HTTPS proxy server. Password: Enter the password required for the HTTPS proxy server. 194 • TSW-70 Series Product Manual — Doc. 8550E...
Page 201 NOTE: For more information on the occupancy sensor, refer to the CEN-ODT-C-POE Supplemental Guide. For more information on configuring the occupancy source in the Crestron scheduling application, refer to the Crestron Room Scheduling Panels Operations Guide. Settings Tab – Device Pairing Device Model: Use the drop-down menu to select POE Occ Sensor.
Page 202 Media Volume: Enter a value (1‒100) for the touch screen media volume level. Beep Enabled: Turn on the toggle to mute the touch screen beep volume. Beep Volume: Enter a value (1‒100) for the touch screen beep volume. 196 • TSW-70 Series Product Manual — Doc. 8550E...
Page 203 Custom URL: Turn on the toggle use a custom update server URL. If turned off, the server URL will default to the standard Crestron update sever. Custom URL Path: If Custom URL Path is turned on, enter the custom URL path for the update server.
Page 204 NOTE: Each application uses a unique setup procedure for registering and configuring the application. For more information on supported applications, refer to Application Selection (on page 213). 198 • TSW-70 Series Product Manual — Doc. 8550E...
Page 205 NOTE: For more information on connecting the touch screen to Crestron Virtual Control, refer to the help file in the Crestron Virtual Control web configuration interface. To access the help file, click the question mark button on the top left of the page.
Page 206: Security
Encrypt: The touch screen will use an encrypted SSL connection OFF: The touch screen will not use an SSL connection. Enable Authentication: Turn on the toggle to use authentication for the touch screen as described in Authentication (on the facing page). 200 • TSW-70 Series Product Manual — Doc. 8550E...
Page 207 After rebooting the touch screen, this username and password must be entered to access the web configuration utility or to connect to the touch screen through Crestron Toolbox™ software. CAUTION: Do not lose the administrator username and password, as the touch screen settings must be restored to factory defaults to reset the username and password.
Page 208 Enter the existing password in the Current Password field. Then, enter a new password in the Password field, and reenter the password in the Confirm Password field. Click OK to save the new password, or click Cancel to cancel the change. 202 • TSW-70 Series Product Manual — Doc. 8550E...
Page 209 Additionally, the number of users displayed on each page may be set to 5, 10, or 20 users. An Actions column is also provided for each user that allows various actions to be performed. The following selections may be selected from the Actions column. Product Manual — Doc. 8550E TSW-70 Series • 203...
Page 210 Click OK to return to the Authentication Management > Users page. Update User Click the editing button in the Actions column to edit settings for the selected user. The Update User dialog box is displayed. Update User Dialog Box 204 • TSW-70 Series Product Manual — Doc. 8550E...
Page 211 Actions column to delete the user. A pop-up dialog box is displayed asking whether the user should be deleted. Click Yes to delete the user or No to cancel deleting the user. Product Manual — Doc. 8550E TSW-70 Series • 205...
Page 212 A user must be added to an Active Directory group to be selected as an Active Directory user. Click OK to save any changes and to return to the Authentication Management > Users page. Click Cancel to cancel creating a new user. 206 • TSW-70 Series Product Manual — Doc. 8550E...
Page 213 Additionally, the number of groups displayed on each page may be set to 5, 10, or 20 users. An Actions column is also provided for each group that allows various actions to be performed. The following selections may be selected from the Actions column. Product Manual — Doc. 8550E TSW-70 Series • 207...
Page 214 Active Directory group in the Name field. If this information is being entered via console commands, omit domain\local from the command (for example, adddomaing - n:crestron -L:A instead of adddomaing -n:domain.local\crestron -L:A). Access Level: The access level of the group and its users...
Page 215 Active Directory Group: Turn on the toggle to use authentication via Active Directory for the group. Click OK to save any changes and to return to the Authentication Management > Groups page. Click Cancel to cancel creating a new group. Product Manual — Doc. 8550E TSW-70 Series • 209...
Page 216: 802.1X Configuration
Domain: If EAP MSCHAP V2- password is selected for Authentication Method, enter a domain name that is required for authentication. Username: If EAP MSCHAP V2- password is selected for Authentication Method, enter a username that is required for authentication. 210 • TSW-70 Series Product Manual — Doc. 8550E...
Page 217 Type a search term into the Search… text field to search for and display CAs that match the search term. The following information is provided for each type of CA: Name: The CA name Expiry Date: The date and time that the CA is set to expire Product Manual — Doc. 8550E TSW-70 Series • 211...
Page 218 Clicking the x button before the CA file is uploaded to the touch screen cancels the upload. Click the x button to close the Manage Certificates dialog box and to return to the 802.1x Authentication page. 212 • TSW-70 Series Product Manual — Doc. 8550E...
Page 219: Application Selection
Microsoft Teams® online meeting solution application (TSW-1070 only) NOTE: A Crestron Flex Microsoft Teams UC system must be configured prior to configuring the Microsoft Teams application on the touch screen. For more information, refer to the UC Video Conference Systems for Microsoft Teams Supplemental Guide.
Page 220 For more information on using and setting up each application, refer to the provider's website. Note: 1. The Crestron general web functionality allows a user to run a custom web application on the touch screen from a web server. The URL for the web application must be provided within the web configuration interface and must use the HTTPS protocol.
Page 221: Connect To Xio Cloud Service
XiO Cloud® service allows supported devices across an enterprise to be managed and configured from one central and secure location in the cloud. Supported Crestron® devices are configured to connect to the service out of the box. Use of the service requires a registered XiO Cloud account. To register for an XiO Cloud account, refer to www.crestron.com/Support/Tools/Licensing-Registration/XiO-Cloud-Registration-...
Page 222: Operation
The toolbar can be hidden by swiping up on the tab or is hidden automatically after a set timeout duration. On-screen Toolbar Screen (with Virtual Toolbar) 216 • TSW-70 Series Product Manual — Doc. 8550E...
Page 223 The following virtual buttons are provided by default and can be used to control the touch screen or the loaded application or program (if supported). Each button can be manually enabled or disabled in the local configuration pages. NOTE: Virtual button functionality can be custom programmed using a Crestron control system. Power : Powers the touch screen off.
Page 224: Resources
Resources The following resources are provided for the TSW-70 Series. NOTE: You may need to provide your Crestron.com web account credentials when prompted to access some of the following resources. Crestron Support and Training Crestron True Blue Support Crestron Resource Library Crestron Online Help (OLH) Crestron Training Institute (CTI) Portal...
Page 225 This page is intentionally left blank. Product Manual — Doc. 8550E TSW-70 Series • 219...
Page 226 Product Manual — Doc. 8550E Crestron Electronics, Inc. 15 Volvo Drive, Rockleigh, NJ 07647 12/06/21 Tel: 888.CRESTRON Specifications subject to Fax: 201.767.7656 change without notice. www.crestron.com...

This manual is also suitable for:

Tsw-570 Tsw-570p Tsw-570pr Tsw-770 Tsw-770p Tsw-770-gv ... Show all

Crestron TSW-70 Series Product Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Crestron TSW-70 Series

Summary of Contents for Crestron TSW-70 Series

This manual is also suitable for:

Table of Contents