Crestron QM-FTCC
Operations & Installation Guide – DOC. 6313A
5. The "Firmware" window displays the model and current firmware
version. Click Upload New Firmware.
"Firmware" Window
6. The Open window allows you to browse to the desired filename (.upg)
file. Click Open to begin the transfer.
"Open" Window
7. The "Firmware" window reopens and indicates the new firmware
version.
NOTE: If problems arise when transferring any Cresnet file (touchpanel
project/firmware), lower the port speed baud rate to 38400 to match the Cresnet
bus speed.
FlipTop Computer Center
FlipTop Computer Center: QM-FTCC • 51