Notes On Instrument Safety - Zeiss Axioskop 2 FS plus Manual

Carl Zeiss

Notes on instrument safety

The Axioskop 2 FS plus and Axioskop 2 FS
compliance with DIN 61010-1 (IEC 1010-1), Safety requirements for electrical measuring, control and
laboratory instruments, and meet the requirements of appendix I of directive 73/23/EC and the relevant
CSA and UL directives. The instruments meet the requirements of the EC directive 89/336/EC and the
EMC legislation of November 9th, 1992. This operation manual includes information and warnings which
must be observed by the user.
The following warning and information symbols are used in this manual:
NOTE
This symbol is a warning which you must observe under all circumstances.
CAUTION
This symbol is a warning which indicates a hazard to the instrument or instrument system.
CAUTION
This symbol is a warning which indicates a hazard to the user of the instrument.
CAUTION
!
Hot surface
CAUTION
UV radiation is emitted
CAUTION
Disconnect the instrument from the line before opening it!
0-8
INTRODUCTION
Notes on instrument safety
microscopes were designed, produced and tested in
MOT
!
Axioskop 2 FS plus
Axioskop 2 FS
MOT
B 40-076 e 02/01