4"X 4" Box Mounting - Crestron C2N-SDC Operations & Installation Manual

Shade & Drape Motor Controller
Installation in a Two-Gang Electrical Box

4"x 4" Box Mounting

When mounting the C2N-SDC in a 4"x 4" electrical box, use the two
8-32 3/8" pan head screws, two #8 flat washers and the two ¼" ID nylon
cable clamps as shown in the following illustration (wiring is not shown
for clarity).
Installation in a 4"x 4" (1900) Electrical box
• Shade & Drape Motor Controller: C2N-SDC
16
Crestron C2N-SDC
Operations & Installation Guide - DOC. 6316