Table of Contents
Advertisement
Crestron C2N-SDC
C2N-SDC Control Signals (continued)
SIGNAL TYPE AND NAME DESCRIPTION
Digital input:
<Sh1_CloseFull>
Digital input:
<Sh1_Stop>
Digital input:
<Sh1_OpenJog>
Digital input:
<Shade1_CloseJog>
Digital output:
<Sh1_LastDirOpen>
Digital output:
<Sh1_LastDirClosed>
Continued on the following page
Operations & Installation Guide - DOC. 6316
Shade & Drape Motor Controller
Closes Shade 1 to the lower mechanical limit,
or until <Sh1_MaxTime> expires, on the
rising edge of the input.
High/1 (rising edge) = Close full;
Low/0 = No effect
Stops Shade 1 movement on the rising edge
of the input.
High/1 (rising edge) = Stop; Low/0 = No effect
Opens Shade 1 for <Sh1_JogTime>
seconds, on the rising edge of the input.
High/1 (rising edge) = Jog open;
Low/0 = No effect
Closes Shade 1 for <Sh1_JogTime>
seconds, on the rising edge of the input.
High/1 (rising edge) = Jog close;
Low/0 = No effect
Indicates that the current direction of
movement is Open. If not currently moving,
indicates that the previous direction of
movement was Open.
High/1 = Last direction Open;
Low/0 = Last direction not Open
Indicates that the current direction of
movement is Closed. If not currently moving,
indicates that the previous direction of
movement was Closed.
High/1 (rising edge) = Last direction Closed;
Low/0 = Last Direction not Closed
Shade & Drape Motor Controller: C2N-SDC • 25
Advertisement
Table of Contents
