Table of Contents
Advertisement
Crestron C2N-SDC
Firmware Upgrade
A firmware
To take advantage of all the C2N-SDC features, it is important that the
upgrade
unit contains the latest firmware available. Please check the Crestron
file has the
website for the latest version of firmware. Not every product has a
extension
firmware upgrade, but as Crestron improves functions, adds new features,
.csf.
and extends the capabilities of its products, firmware upgrades are
posted. To upgrade the firmware, complete the following steps.
NOTE: Viewport versions 3.80 or later have "Load Network Device
(Legacy)..." and "Update Network Device Firmware..." options. Either
will work with firmware version 3.05 but Crestron suggests using
"Update Network Device Firmware..." to load firmware updates.
File Transfer | Load Network Device... Command
Operations & Installation Guide - DOC. 6316
1. Make sure that "Communication Settings," which begins on
page 27, has been performed.
2. As shown after this step, select File Transfer | Load Network
Device... from the Viewport menu bar.
3. As shown in the "Select Network ID" window, select the Net
ID of the C2N-SDC, and then click OK. The "Open" window
appears (refer to the following graphics).
Shade & Drape Motor Controller
Shade & Drape Motor Controller: C2N-SDC • 33
Advertisement
Table of Contents
