Crestron C2N-SDC Operations & Installation Manual page 38

Shade & Drape Motor Controller
NOTE: If problems arise when transferring any Cresnet file (touchpanel
project/firmware), lower the port speed baud rate to 38400 to match the
Cresnet bus speed.
4. Browse to the desired [filename].upg file and click Open to begin
• Shade & Drape Motor Controller: C2N-SDC
34
"Select Network ID" Window
"Open" Window
the transfer.
Crestron C2N-SDC
Operations & Installation Guide - DOC. 6316