Table of Contents
Advertisement
Shade & Drape Motor Controller
NOTE: The parameters shown in the illustration above are the port
settings for a 2-Series control system. Consult the Operations Guide for
the control system being used for the exact parameter selection.
• Shade & Drape Motor Controller: C2N-SDC
30
"Port Settings" Window
4. To verify communication, select Diagnostics | Establish
Communications (Find Rack). This should display a window
that gives the COM port and baud rate. If communications
cannot be established, refer to the "Troubleshooting
Communications" section in the latest version of the Crestron
2-Series Control Systems Reference Guide (Doc. 6256) or the
respective Operations Guide for the control system.
Crestron C2N-SDC
Operations & Installation Guide - DOC. 6316
Advertisement
Table of Contents
Need help?
Do you have a question about the C2N-SDC and is the answer not in the manual?
Questions and answers