Crestron C2N-SDC Operations & Installation Manual page 32

Shade & Drape Motor Controller
Guide (Doc. 6052) or the respective Operations Guide for the control
system. These documents are available from the Crestron website. Refer
to the following figure for a typical connection diagram when uploading
files.
NOTE: Use a standard DB9 male to female "straight-through" cable.
Typical Connection Diagram when Uploading
• Shade & Drape Motor Controller: C2N-SDC
28
1. Open the Crestron Viewport.
Either launch the standalone version of Viewport, or start
SIMPL Windows, and from the menu bar, select Tools |
Viewport.
2. Refer to the following illustration. From the Viewport menu,
select Setup | Communications settings (alternatively, press
Alt+D) to open the "Port Settings" window.
Crestron C2N-SDC
Operations & Installation Guide - DOC. 6316