Programming With Simpl Windows - Crestron C2N-SDC Operations & Installation Manual

Crestron C2N-SDC

Programming with SIMPL Windows

NOTE: The following assumes that the reader has knowledge of SIMPL
Windows. If not, refer to the extensive help information provided with
the software.
NOTE: The following are file extensions for programs that include a
C2N-SDC, developed for specific control system types:
.smw source file
.spz compiled file for 2-series
.bin compiled file for CNX generation
.csz compiled file for CNX generation with SIMPL+
.ush compiled file for CNX generation with SIMPL+ header file
.usp source code module for SIMPL+
.umc user macro for SIMPL
NOTE: In the following description, the PRO2 control system is used.
SIMPL Windows is Crestron's software for programming Crestron
control systems. It provides a well-designed graphical environment with
a number of workspaces (i.e., windows) in which a programmer can
select, configure, program, test, and monitor a Crestron control system.
SIMPL Windows offers drag and drop functionality in a familiar
Windows
This section describes a sample SIMPL Windows program that includes a
C2N-SDC.
Configuration Manager is where programmers "build" a Crestron control
system by selecting hardware from the Device Library. In Configuration
manager, drag the PRO2 from the Control Systems folder of the Device
Library and drop it in the upper pane of the System Views. The PRO2
with its associated communication ports is displayed in the System Views
upper pane.
PRO2 System Views
Operations & Installation Guide - DOC. 6316
®
environment.
Shade & Drape Motor Controller
Shade & Drape Motor Controller: C2N-SDC • 19