Table of Contents
Advertisement
Shade & Drape Motor Controller
The System Views lower pane displays the PRO2 system tree (refer to the
following graphic). This tree can be expanded to display and configure
the communication ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate a C2N-SDC into the system, drag the C2N-SDC from the
Cresnet Control Modules | Cresnet Shade Drape Controllers folder of
the Device Library and drop it in System Views. The PRO2 system tree
displays the C2N-SDC in Slot 9, with a default Net ID of 0E as shown in
the following illustration.
NOTE: The first C2N-SDC in a system is preset with a Net ID of 0E
when its symbol is dragged into the upper pane of System Views.
Additional units are assigned different Net ID numbers as they are added.
• Shade & Drape Motor Controller: C2N-SDC
20
Crestron C2N-SDC
Operations & Installation Guide - DOC. 6316
Advertisement
Table of Contents
