FlipTop Touchpanel Control Center
System Info Window
A control system source file has
the extension .smw. A compiled
SIMPL Windows file has the
extension .spz for a 2-Series
control system.
24 • FlipTop Touchpanel Control Center: C2N-FT-TPS4/TPS4-U
2. After setting the correct parameters, click OK to return to the Crestron
Toolbox main window.
3. Select Tools | System Info. If the connection is successful, the System Info
window displays the processor and device information.
NOTE: To enter the console mode, click the console mode icon
Uploading a SIMPL Windows Program
The SIMPL Windows file can be uploaded to the control system using SIMPL
Windows or via the Crestron Toolbox.
Upload via SIMPL Windows
1. Start SIMPL Windows.
2. Select File | Open to view the "Open" window, navigate to the SIMPL
Window file (.smw), and click Open.
3. Select Project | Transfer Program.
Upload via Crestron Toolbox
1. Verify that the procedure for "Communication Settings" that begins on page
22 has been performed.
Crestron C2N-FT-TPS4/TPS4-U
Operations & Installation Guide - DOC. 6398
.