Uploading And Upgrading; Establishing Communication - Crestron CP3 Operation Manual

3-Series Control Systems

Uploading and Upgrading

USB
18 • 3-Series Control Systems: CP3 & CP3N
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs or firmware) can be transferred to the control system (or device). Finally,
program checks can be performed (such as changing the device ID or creating an IP
table) to ensure proper functioning.
NOTE: Crestron software and any files on the Web site are for authorized Crestron
dealers and Crestron Service Providers (CSPs) only. New users must register to
obtain access to certain areas of the site (including the FTP site).
While the next section provides an overview for communication, refer to
"Establishing Communications with the Control System" in the Crestron 3-Series
Control Systems Reference Guide (Doc. 7150) for connection details. If
communications cannot be established, refer to "Troubleshooting Communications"
in the same guide.

Establishing Communication

Use Crestron Toolbox for communicating with the CP3; refer to the Crestron
Toolbox help file for details. There are two methods of communication: USB and
TCP/IP.
USB Communication
The COMPUTER port on the CP3 connects to the USB port on the PC via the
included Type A to Type B USB cable:
1. Use the Address Book in Crestron Toolbox to create an entry using the
expected communication protocol (USB). When multiple USB devices are
connected, identify the CP3 by entering "CP3" in the Model text box, the
unit's serial number in the Serial text box or the unit's hostname in the
Hostname text box. The hostname can be found in the "System Info"
window in the section marked Ethernet however, communications must be
established in order to see this information in the "System Info" window.
2. Display the CP3's "System Info" window (click the
communications are confirmed when the device information is displayed.
Crestron CP3 & CP3N
icon);
Operations Guide – DOC. 7316C