Uploading A Simpl Windows Program - Crestron C2N-VEQ4 Operation Manual

Cresnet 4-Channel Digital Volume Control
A control system source file has
the extension .smw. A compiled
SIMPL Windows file has the
extension .spz for a 2-Series
control system, .bin for CNX
generation, and .csz for CNX
generation with SIMPL+.
28 • Cresnet 4-Channel Digital Volume Control: C2N-VEQ4
"Port Settings" Window
NOTE: The parameters shown in the illustration on the previous page are the port
settings for a 2-Series control system. Consult the Operations Guide for the control
system being used for exact parameter selection.
5. To verify communication, select Diagnostics | Establish
Communications (Find Rack). This should display a window that
gives the COM port and baud rate. If communication cannot be
established, refer to the "Troubleshooting Communications" section in
the respective Operations Guide for the control system.

Uploading a SIMPL Windows Program

The SIMPL Windows file can be uploaded to the control system using SIMPL
Windows or via the Crestron Viewport.
Upload via SIMPL Windows
1. Start SIMPL Windows.
2. Select File | Open to view the "Open" window, navigate to the SIMPL
Window file (.smw), and click Open.
3. Select Project | Transfer Program.
Upload via Crestron Viewport
1. Verify that the procedure for "Communication Settings" that begins on
page 26 has been performed.
2. As shown after this step, select File Transfer | Send Program
(alternatively, press Alt+P) from the Viewport menu.
Crestron C2N-VEQ4
Operations Guide - DOC. 6135A