Crestron CEN-IO-COM-102 Quick Start

CEN‐IO-COM-102/CEN‐IO-DIGIN-104/CEN‐IO-IR-104/CEN‐IO-RY-104
Wired Ethernet Modules
The Crestron® CEN-IO-COM-102, CEN-IO-DIGIN-104, CEN-
IO-IR-104, and CEN-IO-RY-104 allow for easy expansion of
I/O ports within a system. Distribute these wired Ethernet
modules anywhere in the installation via an available LAN
connection.
The CEN-IO-COM-102, CEN-IO-DIGIN-104, CEN-IO-IR-104,
and CEN-IO-RY-104 share a similar installation procedure.
For simplicity within this guide, the term CEN-IO is used
except where noted.
Check the Box
Item
CEN-IO-COM-102, CEN-IO-DIGIN-104,
CEN-IO-IR-104, or CEN-IO-RY-104
Bracket, Mounting, Integrated DIN Rail Clip,
Black (P/N 4519035)
Screw, 6-32 x 3/8", Pan Head, Phillips, Black
(P/N 2007225)
CEN-IO-COM-102 Only
Connector, 5-Pin (P/N 2003577)
CEN-IO-DIGIN-104 Only
Connector, 5-Pin (P/N 2003577)
CEN-IO-IR-104 and CEN-IO-RY-104 Only
Connector, 8-Pin (P/N 2003580)
Install the Device
The Crestron® wired Ethernet module can be mounted on a
DIN rail, mounted to any flat surface, or placed onto a flat
surface. If necessary, use screws that are suitable for the
mounting surface with a minimum head size of 6.5 mm.
NOTE: The wired Ethernet module can also be rack
mounted. For rack mount installation, refer to
the RMK-IFE-1U Installation Guide (Doc. 7615) at
www.crestron.com/manuals.
DIN Rail Mounting
Qty
1
1
2
2
NOTE: When mounting the device to a DIN rail, do not use
1
the supplied screws to mount the bracket to the bottom of
the wired Ethernet module. Removing the module from the
DIN rail will not be possible.
1
Flat Surface Mounting
Connect the Device
NOTE: Use PoE derived from a UL Listed source having
LPS/Class 2 outputs.
Crestron provides four wired Ethernet modules. Each offers
a different input/output connection. Modules are powered
via Power over Ethernet (PoE). A ground screw is available,
if needed.
CEN-IO-COM-102 Connections
DIN rail
Mounting
Ground
bracket
Screws (2)
Ethernet from a
PoE injector or
Crestron control
CEN-IO
CEN-IO-DIGIN-104 Connections
Flat
surface
Ground
Mounting
bracket
Ethernet from a
Screws (2)
PoE injector or
Crestron control
CEN-IO
Quick Start
LAN PoE:
COM:
Power and
To
10BASE-T / RS-232
100BASE-TX devices
system
LAN PoE: DIGITAL
IN (1-4):
Power and
From
10BASE-T /
control
100BASE-TX
devices
system