Download Print this page

Crestron CWD6790R1 Operation Manual

Two-way rf transceiver module

Advertisement

Quick Links

Crestron CWD6790R1
Two-Way RF Transceiver Module
Operations Guide

Advertisement

loading

Summary of Contents for Crestron CWD6790R1

  • Page 1 Crestron CWD6790R1 Two-Way RF Transceiver Module Operations Guide...
  • Page 2 To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of at least 20 centimeters from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. This document was written by the Technical Publications department at Crestron. ©2013 Crestron Electronics, Inc.
  • Page 3: Table Of Contents

    Crestron CWD6790R1 Two-Way RF Transceiver Module Contents Two-Way RF Transceiver Module: CWD6790R1 ......... 1     Functions and Features ......................1   Specifications ..........................2   Physical Description ........................2   Setup ............................4   Labeling ............................. 4   Documentation ........................... 4 Contents ...
  • Page 5: Two-Way Rf Transceiver Module: Cwd6790R1

    The module operates according to the IEEE 802.15.4 specification and can be configured to minimize the possibility of interference with other devices. The module receives RF signals from one or more Crestron devices and can transmit these signals over the air for further processing (depending on the application).
  • Page 6: Specifications

    Two-Way RF Transceiver Module Crestron CWD6790R1 Specifications The table below is a summary of specifications for the CWD6790R1. Specifications of the CWD06790R1 SPECIFICATION DETAILS Power Requirements 0.58 W (5.0 Vdc @ 0.115 A) Operating Frequency 2400 MHz to 2483.5 MHz (802.15.4 compliant)
  • Page 7 The 10 pin connector provides power to the module as well as communications between the module and wired devices. Refer to the following table for pin assignments of the module interface connector. NOTE: Pin 1 provides power to the circuit card. Two-Way RF Transceiver Module: CWD6790R1  3 Operations Guide - DOC. 7559A...
  • Page 8: Setup

    20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” 4  Two-Way RF Transceiver Module: CWD6790R1 Operations Guide - DOC. 7559A...
  • Page 9 Crestron CWD6790R1 Two-Way RF Transceiver Module This page intentionally left blank. Two-Way RF Transceiver Module: CWD6790R1  5 Operations Guide - DOC. 7559A...
  • Page 10 Crestron Electronics, Inc. Operations Guide – DOC. 7559A 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON 09.13 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.