Crestron C2N-FT-TPS4 Operations & Installation Manual page 24

FlipTop Touchpanel Control Center
System View of PRO2
20 • FlipTop Touchpanel Control Center: C2N-FT-TPS4/TPS4-U
The System Views lower pane displays the PRO2 system tree. This tree can be
expanded to display and configure the communications ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate a TPS4 into the system, drag the C2N-FT-TPS-4 (Cresnet) from the
Touchpanels | Touchpanels (Cresnet) folder of the Device Library and drop it in
System Views. The PRO2 system tree displays the TPS4 in Slot 9, with a default Net
ID of 03, as shown in the following illustration.
C2Net Device, Slot 9
NOTE: Alternatively, the TPS4 touchpanel could be connected to the control
system via Ethernet instead of Cresnet.
Setting the Net ID in Device Settings
Double-click the C2N-FT-TPS4 (Cresnet) icon in the upper pane to open the
"Device Settings" window. This window displays TPS4 device information. The Net
ID can be changed in this window using the Net ID tab, as shown in the following
figure.
Crestron C2N-FT-TPS4/TPS4-U
Operations & Installation Guide - DOC. 6398