Firmware Upgrade - Crestron C2N-FT-TPS4 Operations & Installation Manual

FlipTop Touchpanel Control Center
26 • FlipTop Touchpanel Control Center: C2N-FT-TPS4/TPS4-U

Firmware Upgrade

To take advantage of all the C2N-FT-TPS4/TPS4-U features, it is important that
the unit contains the latest firmware available. Please check the Crestron website
for the latest version of firmware. Not every product has a firmware upgrade,
but as Crestron improves functions, adds new features, and extends the
capabilities of its products, firmware upgrades are posted.
Typically, upgrade files are downloaded as .zip files. With Toolbox, it is not
necessary to extract the files before uploading; Toolbox will automatically
extract the file(s) for you.
To upgrade the firmware, complete the following steps.
NOTE: A firmware upgrade file for the TPS4 touchpanel has the extension .csf. The
following is a typical firmware upgrade file name for the C2N-FT-TPS4.
tps-4_qm-ftcc-tps_tps-4_c2n-ft-tps-4_2.007.0161.csf
1. Make sure that "Communication Settings," which begins on page 22, has
been performed.
2. Open Crestron Toolbox.
3. Open the Network Device Tree (the firmware upgrade function is also
available in the SMW Program Tree window).
4. Click on the '+' next to the device name to display the Net ID, then right-
click on the Net ID and select Functions | Firmware. (Refer to the
following illustration.)
Network Device Tree Window – Right-Click Sub Menu
5. The "Firmware" window displays the model and current firmware version
as shown in the following graphic.
Crestron C2N-FT-TPS4/TPS4-U
Operations & Installation Guide - DOC. 6398