Table of Contents
Advertisement
Crestron C2N-FT-TPS4/TPS4-U
Operations & Installation Guide – DOC. 6398
"Device Settings" Window
NOTE: This procedure sets the Net ID for the TPS4 in the program only. It does not
automatically set the Net ID for the C2N-FT-TPS4/TPS4-U hardware. SIMPL
Windows automatically changes Net ID values of a device added to a program if a
duplicate device or a device with the same Net ID already exists in the program.
Always ensure that the hardware and software settings of the Net ID match. For Net
ID hardware setting details, refer to "Identity Code" on page 9.
Symbols in Programming Manager
Programming Manager is where programmers "program" a Creston control system
by assigning signals to symbols. The symbol for the C2N-TPS-TPS4 (Cresnet) can
be viewed by double-clicking on the icons or dragging them into Detail View. A
description for each signal in the symbol is provided in the SIMPL Windows help
file (F1).
Device Extender
If you wish to have the program sense the open and closed position of the flip top,
insert the Flip Top Open/Close device extender.
Example Program
An example program for the C2N-FT-TPS4/TPS4-U is available from the "Example
Program" section of the Crestron website (www.crestron.com/exampleprograms
Search for C2N-FT-TPS4/TPS4-U.ZIP.
Programming with VT Pro-e
VT Pro-e, design and programming Windows
of unlimited control screen variations incorporating two and three-dimensional
graphics and text. A set of pages, which make up a project, can be designed for each
TPS4 touchpanel application. Each page contains objects such as custom control
graphics, two and three-dimensional buttons, sliders, and digital readouts which
allow the user to interface with the control system via join numbers. Unjoined
objects are not interfaced with the system and thus cannot initiate any functions. The
completed and compiled project is uploaded to the touchpanel and programmed into
the flash PROM via the File | Upload Project command. The touchpanel uses the
FlipTop Touchpanel Control center: C2N-FT-TPS4/TPS4-U • 21
FlipTop Touchpanel Control Center
-based software, permits the creation
)
.
Advertisement
Table of Contents
