Table of Contents
Advertisement
FlipTop Touchpanel Control Center
18 • FlipTop Touchpanel Control Center: C2N-FT-TPS4/TPS4-U
submitted to Crestron's True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.
You can create a program that allows you to include the TPS4 in a Crestron control
system. The program output of Crestron SystemBuilder is a SIMPL Windows
program with much of the functionality encapsulated in macros and templates.
Therefore, extending the capabilities of the system is very easy. Crestron
SystemBuilder and SIMPL Windows are intended for users with different levels of
programming knowledge. Crestron SystemBuilder is easier to use for the beginning
programmer, and much faster for all programmers. However, it does not allow the
degree of control and flexibility that SIMPL Windows does. Of course, one can
initiate programming using the easiest method (Crestron SystemBuilder) and use
advanced techniques that are available from SIMPL Windows to customize the job.
Crestron SystemBuilder comes with templates for all supported interfaces. If a user
wishes to create a touchpanel project using templates with a different look-and-feel,
this can be accomplished by making a custom template. This custom template can
then be used by Crestron SystemBuilder to create the final project files to be loaded
into the panels. Alternatively, VT Pro-e can be used to tweak projects created with
the Crestron SystemBuilder or develop original touchpanel screen designs.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
The following are the earliest useable software version requirements for the PC:
•
(Optional) System Builder version 2.0.6 or later with SystemBuilder
Templates version 2.0.1or later. Requires the following software versions:
SIMPL Windows version 2.06.20 or later with library update file 345
o
or later. Requires SIMPL+ Cross Compiler version 1.1.
o
Crestron database 17.4.0 or later
Vision Tools Pro-e 3.3.4.0 or later
o
Crestron Toolbox 1.01.06 or later
o
Engraver 2.4.1.2 or later
o
o
Microsoft DCOM '98 if running under Win 95 or 98 (not needed for
NT or 2000)
Microsoft Data Access Components if running under Win 95 or 98 (not
o
needed for NT or 2000)
•
SIMPL Windows version 2.06.20 or later, with Library Update file 355.
Requires SIMPL+
•
Crestron Toolbox version 1.02.05 or later.
•
Crestron Database version 17.4.0 or later.
•
VisionTools Pro-e version 3.4.2.5 or later. Used for graphical touchscreen
design.
•
(Optional) Crestron Engraver version 2.6.0.0. (required if touchpanel bezel
is to be engraved).
Crestron C2N-FT-TPS4/TPS4-U
®
Cross Compiler version 1.1.
Operations & Installation Guide - DOC. 6398
Advertisement
Table of Contents
