Table of Contents
Advertisement
Crestron Green Light
SIMPL Windows
Firmware
14 • Crestron Green Light
®
Power Meter Control Unit
8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to
connect the two LAN ports directly without using a hub or router.
3.
Use the Device Discovery Tool in Crestron Toolbox to detect all Ethernet
devices on the network and their IP configuration. The tool is available in
Toolbox version 1.15.143 or later.
4.
Use the Address Book in Crestron Toolbox to create an entry for the
GLS-EM-MCU with the GLS-EM-MCU's TCP/IP communication
parameters.
5.
Display the "System Info" window (click the
GLS-EM-MCU entry from the Address Book or the Address Book
drop-down menu.
Programs and Firmware
Program or firmware files may be distributed from programmers to installers or from
Crestron to dealers. Firmware upgrades are available from the Crestron Web site as
new features are developed after product releases. One has the option to upload
programs via the programming software or to upload and upgrade via the Crestron
Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help
file or the Crestron Toolbox help file.
If a SIMPL Windows program is provided, it can be uploaded to the control system
using SIMPL Windows or Crestron Toolbox.
Check the Crestron Web site to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
Upgrade GLS-EM-MCU firmware via Crestron Toolbox.
1.
Establish communication with the GLS-EM-MCU and display the "System
Info" window.
Select Functions | Firmware... to upgrade the GLS-EM-MCU firmware.
2.
Program Checks
Using Crestron Toolbox, display the "System Info" window (click the
select the Functions menu to display actions that can be performed on the
GLS-EM-MCU.
Be sure to use Crestron Toolbox to create the GLS-EM-MCU IP table.
1.
Select Functions | IP Table Setup.
2.
Add, modify or delete entries in the IP table. The GLS-EM-MCU can have
only one IP table entry.
3.
A defined IP table can be saved to a file or sent to the device.
Edit the control system's IP table to include an entry for the GLS-EM-MCU. The
entry should list the GLS-EM-MCU's IP ID (specified on the GLS-EM-MCU's IP
table) and the internal gateway IP address 127.0.0.1.
®
Power Meter Control Unit: GLS-EM-MCU
Crestron GLS-EM-MCU
icon) and select the
Operations Guide – DOC. 7294B
icon) and
Advertisement
Table of Contents
