JAI GO-5000M-PGE-UV User Manual page 51

Gain Auto
This function automatically controls the gain level.
This is controlled by the command JAI ALC Reference.
There are three modes.
OFF: Adjust manually.
Once: Operate only one time when this command is set
Continuous: Operate the auto gain continuously
The following detailed settings are also available.
ALC Speed: The rate of adjustment of GainAuto can be set (Common with ExposureAuto).
Gain Auto Max:
Gain Auto Min:
ALC Reference:
ALC Area Selector: The portion of the image used for auto gain control can be set (common
ALC Area Enable: This command can make selected area(s) disabled or enabled. If ALC
The maximum value of GainAuto control range can be set
The minimum value of GainAuto control range can be set
The reference level of Gain Auto control can be set (Common with
ExposureAuto)
with Exposure Auto）
Area Selector selects ALC Area Enable ALL, and it is set to True, all areas
are enabled and in this case, preset areas are all disabled.
— 51 —
GO-5000M-PGE-UV