Pulse Generator - JAI GO-5000M-PGE-UV User Manual

Cmos digital progressive scan monochrome uv camera

Hide thumbs Also See for GO-5000M-PGE-UV:

Table of Contents

Pulse Generator

The GO-5000M-PGE-UV has a frequency divider using the pixel clock as the basic clock and a pulse

generator. In the Pulse Generator, various Clear settings are connected to GPIO.

The following shows the Pulse Generator default settings.

Pulse Generator default settings

Clock Pre-scaler

Clock pre-scaler (Divide Value) can set the dividing value of the frequency divider (12-bit

length) and the pixel clock is used for this. In the GO-5000M-PGE-UV, the pixel clock is set at 48

MHz.

Pulse Generator Selector

This is where you select a pulse generator. In the GO-5000M-PGE-UV, it is fixed to Pulse

Generator 0.

Pulse Generator setting / Pulse Generator pulse construction

— 24 —

GO-5000M-PGE-UV

Table of Contents