Step 5: Use The Serial Number Labels To Create The Installation Map - enphase IQ 7 Installation And Operation Manual

Step 5: Use the Serial Number Labels to Create the Installation Map

The Enphase Installation Map is a diagram of the physical location of each module in your PV installation.
Copy or use the blank map on page 38 to record module placement for the system, or provide your own
layout if you require a larger or more intricate installation map.
Each AC Module, Enphase Envoy, and Enphase Battery have a removable serial number label. Build the
installation map by peeling the serial number labels from the modules and placing the labels on the map.
You will also place the Enphase IQ Envoy (required) and IQ Battery (optional) serial numbers on the map
after installation.
After you have created the installation map, use the Enphase Installer Toolkit mobile app to record serial
numbers and configure the system.
For more information, refer to "Detect the Microinverters" in the help topics of the Installer Toolkit app.
A. Remove the label from each module before passing it up to the roof. Apply the label to the
proper position on the installation map.
B. Peel the label from the IQ Envoy (and Enphase IQ Battery, if installed) and affix it to the
installation map.
C. Always keep a copy of the installation map for your records.
Label affixed to the side of the Microinverter
18
© 2021 Enphase Energy Inc. All rights reserved.
IQ Microinverter for ACM Applications
Affix serial number
labels
Label affixed to the top of the PV module frame
January 06, 2021