Enphase Iq7Plus-72-E-Acm-Int/Iq7Plus-72-Acm-Int Specifications - enphase IQ 7 Installation And Operation Manual

Topic
Maximum microinverters per 20 amp branch circuit
230 VAC (single phase)
230 VAC (multi phase)
EN 50530 (EU) weighted efficiency
230 VAC (single phase)
Static MPPT efficiency (weighted, ref EN 50530)
Total harmonic distortion
Ambient temperature range
Night tare loss
Storage temperature range
Dimensions not including mounting bracket
(approximate)
Connector type
Weight
Environmental category / UV exposure rating
Cooling
Relative humidity range
Approved for wet locations
Pollution degree
Maximum altitude
Compliance
Grounding
Monitoring
Communication
Integrated DC disconnect
Integrated AC disconnect

Enphase IQ7PLUS-72-E-ACM-INT/IQ7PLUS-72-ACM-INT Specifications

IQ7PLUS-72-E-ACM-INT/IQ7PLUS-72-ACM-INT Microinverter Parameters
Topic
Peak Power Tracking Voltage
Operating range
Maximum DC input voltage
31
Enphase IQ7-60-ACM-INT Microinverter Parameters
Miscellaneous Parameters
Features and Specifications
DC Parameters
© 2021 Enphase Energy Inc. All rights reserved.
IQ Microinverter for ACM Applications
Unit Min
%
%
%
C
-40
mW
C
-40
219 mm x 191 mm x 37.9mm
Enphase DC Connector
1.3 kg (2.86 lbs.)
IP67 Outdoor
Natural convection - no fans
4% to 100% condensing
Yes
PD3
2000 meter (6561 feet)
AS/NZS4777.2, RCM, IEC/EN 61000-6-3, IEC/EN
62109-1, IEC/EN 62109-2
The DC circuit meets the requirements for ungrounded
PV arrays in NEC. Ground fault protection (GFP) is
integrated into the class II double insulated microinverter.
Enlighten Manager and MyEnlighten monitoring options
require an Enphase IQ Envoy
Power line
The DC connector has been evaluated and approved for
use as the load-break disconnect.
The AC connector has been evaluated and approved for
use as the load-break disconnec.
Unit Min
V
V
V
Typical Max
16
48
96.5
99.5
5
+65
50
+85
Typical Max
27 36 45
16 60
60
January 06, 2021