VersaLogic Ocelot Reference Manual page 16

Distributor of VersaLogic Corporation: Excellent Integrated System Limited
Datasheet of VL-CBR-2012 - 20" 24-BIT LVDS CABLE
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
3. Attach Power

Plug the power adapter cable VL-CBR-1008 into socket J11. Attach the
motherboard connector of the ATX power supply to the adapter.
4. Review Configuration

Before you power up the system, double check all the connections. Make sure
all cables are oriented correctly and that adequate power will be supplied to the
VL-EPMs-21 and peripheral devices.
5. Power On

Turn on the ATX power supply and the video monitor. If the system is correctly
configured, a video signal should be present.
6. Select a Boot Drive

During startup, type CTRL-B to display the boot menu. Insert the OS
installation CD in the CD-ROM drive and select to boot from the CD-ROM
drive.
7. Install Operating System

Install the OS according to the instructions provided by the OS manufacturer.
(See Operating System Installation.)
Note: If you intend to operate the VL-EPMs-21 under Windows XP or
Windows XP Embedded, be sure to use Service Pack 3 (SP3) for full support of
the latest device features.
VL-EPMs-21 Reference Manual
Configuration and Setup
9