Starting The Engine - Manitowoc Grove GMK4090 Operating Manual

10.2.6
S
H
Operating manual
GMK4090

Starting the engine

This section pertains to starting a warm and cold engine.
Danger of explosion when using starter fuel
The engine may never be started with the aid of starter fuel. The starter fuel
sprayed into the intake manifold can ignite.
•
Do not press the accelerator.
•
Turn the ignition key to position 1.
•
Press button (1) upwards.
•
Let go of the button after the engine starts.
After starting, the idling speed corresponds to the standard value.
If the engine does not start, release the ignition key after about 15 seconds
and wait one minute before trying again.
To set the idling speed;
If the engine does not start after several attempts;
engine , p. 8 - 19.
Starting/switching off the engine – for crane operation
10.2 Starting the engine – from the crane cab
à
p. 10 - 9.
3 302 736 en
à
Malfunctions on the
10 - 7