Table of Contents
Advertisement
10.3 FILE MENU
Open a new test file. Select Close Test File from the File menu. A message box will be displayed asking if you
want to save the file. Click the OK button. The Save Input Quantities As dialog box will be displayed. Enter a
name for the test and select the OK button. The test is saved. The window is cleared from the screen thus clos-
ing the test.
•
Verify that the file contains the values displayed in the test dialog boxes by looking at the file with a text edi-
tor.
Select a test where the input quantities have been changed and not saved. Select Save Input Quantities from
the File menu. The test is saved.
Verify the file format:
•
Read the file using any text editor. The saved file is in ASCII format.
•
There is a line for each input quantity listed in Table 1 regardless of whether a particular input quantity was
used for the test.
•
Each line contains the value's ID number, the value, and a brief description of the quantity. Each item on
the line is separated by spaces.
•
There is one section for each test.
Verify file can be re-opened:
•
Close the test file that was just saved.
•
Open the saved test file.
•
Select the menu item for the test.
•
Verify that the quantities in the dialog box are the same as in the test just saved.
Create a new test. Select Save Input Quantities from the "File" menu. The Save Input Quantities As dialog
box will be displayed. Enter a name for the test and select the OK button. The test is saved.
Verify the saved test as above.
This menu item results in a dialog box supplied by Microsoft. Therefore only the "OK" button of the dialog box
is tested.
Select Save Input Quantities As from the File menu. Select a drive, path, and file name to save the input
quantities of test.
Verify that this item worked by following the same procedure as for the Save Input Quantities menu item.
This menu item results in a dialog box supplied by Microsoft. Therefore only the "OK" button of the dialog box
is tested.
Select Save Output As from the File menu. Select a drive, path, and file name from the dialog box to save the
test output. Click on OK and the file is saved.
10
10-
10
LPS-O Line Protection System
10 ALPS-TEST PROGRAM
10.3.5 SAVE INPUT QUANTITIES
10.3.6 SAVE INPUT QUANTITIES AS
10.3.7 SAVE OUTPUT AS
GE Power Management
Advertisement
Table of Contents
