Commend C-G8-S0 Manual page 29

G8-S0/G3-S0-I
 Example:
PA-Code in CCT 800
4***
63**
345*
5*
Attention:
Observe collisions with Intercom call numbers and function codes (i.e. in case of a defined range of
"2***", e.g. the Intercom call number "210" can not be dialled)!
Call from telephone to Intercom Server
same as in auto dialler mode
Cancel Conversation
 At the Intercom station the conversation is cancelled with X.
 At the telephone the conversation is cancelled with # or by hanging up.
Speech Control
same as in auto dialler mode
Indication of Telephone Number in Display
The telephone number dialled is shown in the display.
A cursor indicates if dialling has been completed.
EE811
0043
6642324252627_
Telephone 145
œ Volume
X-Cancel
As soon as the conversation is established the cursor disappears and after dialling in the Intercom
Server is possible (e.g. conference). 77 switches back to telephone dialling for 8 seconds.
Call Request in PABX Mode
It is possible to combine Auto Dialler Mode for Call Requests with the PABX Mode. So the Intercom
stations can dial to any desired telephone number, in case of a call request or input message Auto
Dialler mode is activated automatically.
1.1/1010
Dialable Telephone Numbers
4000 – 4999
6300 – 6399
3450 – 3459
50 – 59
see page 23
see page 24
EE411
Telephone Interface
29