Declaring The Significant Parameters - HBM MP60 Operating Manual

PME-MP60/MP07
6

Declaring the significant parameters

Group Parameters
DIA−
Password
LOGUE
PassStat
I.ParaS to
I.AddFnc
PARAM.
Load ?
SET
Save ?
A0616-13.4 en
Specifying (changing) a password, 0000 - 9999
(Factory preset password: 0000)
Define password status:
active=password must be entered;
inactive=PME can be operated without a password
Access to group via keyboard free or locked.
You can either load the factory settings or one of the four
All device settings can be saved in four parameter sets and
will be unaffected by a power failure. Every time you switch
from Setup to Measuring mode, you are asked whether or not
the change is to be saved. The data is backed up permanently
if you confirm the query with "Yes" on quitting Setup mode.
Meaning
stored parameter sets.
39
HBM