Seco SBC-C41-pITX User Manual page 60

4.4.3.3
PCI Express Configuration submenu
Menu Item
Compliance Mode
PCIE Root Port 3 - M.2 TYPE 2230
(CN15)
PCIE Root Port 4 Internal LAN 0
(CN20)
PCIE Root Port 5 Internal LAN 1
(CN21)
4.4.3.3.1 PCIE Root Port #x submenus
Menu Item
PCIE Root Port 3 - M.2 TYPE 2230
PCIE Root Port 4 Internal LAN 0
PCIE Root Port 5 Internal LAN 1
ASPM
PCIe Speed
4.4.3.4 SATA Drives Configuration submenu
Menu Item
SATA Controller
SATA Test Mode
SATA Speed
SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
Fast Mode
Fast Plus Mode
Options Description
Enabled / Disabled Compliance Mode Enable/Disable
Sets the parameters for each single PCI-e Root Port
Options Description
Controls the PCI Express Root Port.
Auto
Auto: disable unused root port automatically for the most optimised power saving.
Enabled
Enable: Always enable the PCIe root port.
Disabled
Disable: Always disable the PCIe root port
Disable / L0s PCI Express Active State Power Management Settings
Auto
Gen1
Configure PCIe Speed
Gen2
Options Description
Enables or Disables the Chipset SATA controller, which supports the 2 black internal SATA ports (up to
Enabled / Disabled
3GB/s supported per port).
Enabled / Disabled Enable / Disable SATA Test Modes
Gen1
Gen2 Select SATA Speed
Gen3
(all the following items will disappear)
60