Seco SBC-C41-pITX User Manual page 56

4.3.17.6 GPIO Configurations submenu
Menu Item
Direction
Default Output Value
4.3.18 M.2 peripheral management submenu
Menu Item
WiFi on M.2
Bluetooth on M.2
WWAN on M.2
4.3.19 ACPI Devices Configuration submenu
4.3.19.1 I2C Device Configuration submenu
Menu Item
Device type
Device type
Device type
Device type
SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
Options Description
Configure GPIOx pin as input or output. In case the GPIOx is configured as an output, the default output
Input / Output
value can be configured
To fix the GPIOx starting vale: Last means no changes with respect to the last boot. GPIx shows input x
Low / High / Last
current value.
Options Description
Disabled / Enabled Enable Wifi capabilities of a WiFi M.2 Key E Card
Disabled / Enabled Enable Bluetooth capabilities of a BT M.2 Key E Card
Disabled / Enabled Enable WWAN capabilities of a WWAN M.2 Key B Card
Options Description
Disabled / 7bits / 10bits Select I2C device address format for I2C Bus #4 Device #17
Disabled / 7bits / 10bits Select I2C device address format for I2C Bus #4 Device #18
Disabled / 7bits / 10bits Select I2C device address format for I2C Bus #4 Device #19
Disabled / 7bits / 10bits Select I2C device address format for I2C Bus #4 Device #20
56