Seco SBC-C41-pITX User Manual page 59

Memory Scrambler
4.4.3 South Cluster Configuration submenu
Menu Item
HD Audio Configuration
LPSS Configuration
PCI Express Configuration
SATA Drives
SCC Configuration
USB Configuration
Miscellaneous Configuration
4.4.3.1 HD Audio Configuration submenu
Menu Item
HD Audio Support
HD Audio DSP
4.4.3.2 LPSS Configuration submenu
Menu Item
I2C #0 (D22:F0)
Set LPSS I2C #0 Speed
I2C #4 (D23:F0) Touch screen I2C
Set LPSS I2C #4 Speed
SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
Enabled / Disabled Enable / Disable the Memory Scrambler Support
Options Description
See submenu HD Audio Configuration Settings
See submenu Low Power Sub System Configuration Settings
See submenu PCI Express Configuration Settings
See submenu SATA Devices Configuration Setup options
See submenu Storage Control Cluster Configuration Settings
See submenu USB configuration Settings
See submenu Miscellaneous Settings
Options Description
Enabled / Disabled Enable / Disable HD Audio Support
Enabled / Disabled Enable / Disable HD Audio DSP
Options Description
Disable
Enable/Disable LPSS I2C #0 Support. This I2C line is not connected to anything, but must be enabled if
PCI Mode
I2C #4 is required
ACPI Mode
Standard Mode
Fast Mode Only available when LPSS I2C #0 is not disabled. Select LPSS I2C #0 Speed
Fast Plus Mode
Disable
PCI Mode Enable/Disable LPSS I2C #4 Support.
ACPI Mode
Standard Mode Only available when LPSS I2C #4 is not disabled. Select LPSS I2C #4 Speed
59