Seco SBC-C41-pITX User Manual page 50

4.3.13 Platform Trust technology submenu
Menu Item
fTPM
4.3.14 Main Thermal Configuration submenu
Menu Item
Critical Temperature (°C)
Passive Cooling Temperature (°C)
TC1
TC2
TSP (seconds)
4.3.15 HSUART Transceiver Configuration submenu
Menu Item
HSUART #0 Interface
HSUART #0 RX termination
HSUART #0 TX termination
HSUART #2 Interface
HSUART #2 RX termination
HSUART #2 TX termination
SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
Options Description
Enabled / Disabled Enable/Disable fTPM
Options Description
Settable Threshold (°C) Above this threshold, an ACPI aware OS performs a critical shut down. Allowed range is from 80 to 110
[80 .. 110] included, where 110 means disabled.
Settable Threshold (°C) Above this threshold, an ACPI aware OS begins to lower the CPU speed. Allowed range is from 60 to 105
[60 .. 105] included, where values not below Critical Temperature mean disabled.
[0...16] Thermal Constant 1: part of the ACPI Passive Cooling Formula
[0..16] Thermal Constant 2: part of the ACPI Passive Cooling Formula
[2..32] Period of temperature sampling when Passive Cooling
Options Description
RS-232
Select among RS232 (default), RS-422 or RS-485 interface. When selecting RS-422 or RS-485, the
RS-422
following menu item will appear
RS-485
RX termination can be enabled when RS-422 or RS-485 is selected.
Disabled / Enabled
Disable (default) or enable 120 Ohm RX Termination.
TX termination can be enabled when RS-422 or RS-485 is selected.
Disabled / Enabled
Disable (default) or enable 120 Ohm TX Termination.
RS-232
Select among RS232 (default), RS-422 or RS-485 interface. When selecting RS-422 or RS-485, the
RS-422
following menu item will appear
RS-485
RX termination can be enabled when RS-422 or RS-485 is selected.
Disabled / Enabled
Disable (default) or enable 120 Ohm RX Termination.
TX termination can be enabled when RS-422 or RS-485 is selected.
Disabled / Enabled
Disable (default) or enable 120 Ohm TX Termination.
50