Seco SBC-C41-pITX User Manual page 54

4.3.17.2 Reset Causes Handling submenu
Menu Item
Reset Button Pressed
Clear from log
WDT Timeout Expired
Clear from log
Power Failure
Clear from log
E.C. soft reset
Clear from log
4.3.17.3 Super IO Configuration submenu
Menu Item
Serial Port 1
Address
IRQ
Serial Port 2
Address
SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
Options Description
Happened / Not
If Reset button is pressed, this parameter will automatically be set as Happened
happened
Enabled / Disabled If Reset button is pressed and Clear from log parameter is enabled, this will require system reset
Happened / Not
If Watchdog Timer (WDT) timeout has expired, this parameter will automatically be set as Happened
happened
If Watchdog Timer (WDT) timeout has expired, and Clear from log parameter is enabled, this will require
Enabled / Disabled
system reset
Happened / Not
If a Power Failure occurs, this parameter will automatically be set as Happened
happened
Enabled / Disabled If a Power Failure occurs and Clear from log parameter is enabled, this will require system reset
Happened / Not
If the Embedded Controller (E.C.) is reset, this parameter will automatically be set as Happened
happened
If the Embedded Controller (E.C.) is reset and Clear from log parameter is enabled, this will require system
Enabled / Disabled
reset
Options Description
Enabled/Disabled Enables or Disables Serial Port # 1
0X3F8, 0x3E8, 0x2F8,
0x2F0, 0x2E8, 0x2E0,
Select the Base address for Serial Port #1, if enabled.
0x2A8, 0x2A0, 0x288,
0x280
3 / 4 / 5 / 6 / 7 / 10 / 11
Select the IRQ line to assign to Serial Port #1, if enabled.
/ 14 / 15
Enabled/Disabled Enables or Disables Serial Port # 2
0X3F8, 0x3E8, 0x2F8,
0x2F0, 0x2E8, 0x2E0,
Select the Base address for Serial Port #2, if enabled.
0x2A8, 0x2A0, 0x288,
0x280
54